Axis Q2901-E 9MM 8.3 FPS 0645-001 - eet01
[0645-001]



Part Number: 0645-001

Manufacturer: Axis

Condition: New

Short Description:

Axis Q2901-E 9MM 8.3 FPS 0645-001

Axis Q2901-E 9MM 8.3 FPS  0645-001 - eet01

£3,807.00
£4,568.40 - Inc VAT




Click the Like Button below to see the latest discount:

- Temperature alarm
- Isothermal palettes
- Spot temperature reading
- High performance intelligent video
Temperature detection
AXIS Q2901-E PT Mount offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between -40 °C to 550 °C (-40 °F to 1022 °F).
Isothermal palettes
Isothermal imaging makes it possible to configure highlighted temperature-spans in the image. They help to define which temperature corresponds to which color. The Lower limit denotes the temperature where the colored part of the palette will start and all temperatures above this limit will stand out.
Spot temperature reading
This capability is used to view the temperature of a particular area of the image. The emissivity can also be adjusted (depending on the material characteristics) to get a more precise reading. Used as a visual aid for an operator
For a list of emissivity for different material, see here
More features
- MicroSD/SDHC memory card slot
- Network security using multiple user access levels, IP address filtering, HTTPS encryption, IEEE 802.1X authentication
- Supports Quality of Service (QoS) which helps secure the necessary bandwidth for streaming video and control commands over a network
- Supports Internet Protocol version 6 (IPv6) in addition to IP version 4 (IPv4)

Reviews

Specs

Lens system
Zoom capability No
Fixed focal length 9 mm
Camera
Field of view (FOV) angle 35°
Video
Maximum resolution 336 x 256 pixels
Video formats supported H.264, MPEG4
Frame rate 8.3 fps
Audio
Built-in microphone No
Networking
Ethernet LAN Yes
Wi-Fi No
Cabling technology 10/100Base-T(X)
Supported network protocols IPv4/v6, HTTP , HTTPS c , SSL/TLS c , QoS Layer 3 DiffServ , FTP , CIFS/SMB, SMTP , Bonjour , UPnP T M , SNMP v1/v2c/v3(MIB - II), DNS, DynDNS, NTP , RTSP , RTP , T CP , UDP , IGMP , RT CP , ICMP , DHCP , ARP , SOCKS, SSH
Security
Video motion detection Yes
Active tampering alarm Yes
IP address filtering Yes
Security algorithms 802.1x RADIUS, HTTPS
HTTPS encryption Yes
Motion detector No
Power
Power over Ethernet (PoE) Yes
Power consumption (typical) 10 W
Ports & interfaces
Connectivity technology Wired
Microphone in No
Ethernet LAN (RJ-45) ports 1
Interface RJ-45
Operational conditions
Operating temperature (T-T) -40 - 60 °C
Weight & dimensions
Weight 1.8 kg
Certificates
Certification EN 550 22 Class A, EN 50 12 1 - 4, EN 550 24, EN 6 1 000 - 3 - 2, EN 6 1 000 - 3 - 3, EN 6 1 000 - 6 - 1, EN 6 1 000 - 6 - 2, FCC, ICES - 003, VCCI, ITE, C - Tick AS/NZS CISPR22, KCC KN22, KN - 24
Packaging content
Manual Yes
Night vision
Night vision No
Storage
Card reader integrated Yes
Compatible memory cards MicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in hard drive No
Hard drive capacity 128 GB
Flash memory 256 MB
Design
Form factor Bullet
Colour of product Black, White
Housing material Metal
International Protection (IP) code IP66
Performance
Type IP
Placement supported Outdoor
PTZ control (Pan/Tilt/Zoom) No

Related Products

Refurbished Printers

Features

Axis Q2901-E. Type: IP, Placement supported: Outdoor. Form factor: Bullet, Colour of product: Black, White, Housing material: Metal. Maximum resolution: 336 x 256 pixels, Video formats supported: H.264, MPEG4, Frame rate: 8.3 fps. Field of view (FOV) angle: 35°. Fixed focal length: 9 mm

Product Description

- Temperature alarm
- Isothermal palettes
- Spot temperature reading
- High performance intelligent video
Temperature detection
AXIS Q2901-E PT Mount offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between -40 °C to 550 °C (-40 °F to 1022 °F).
Isothermal palettes
Isothermal imaging makes it possible to configure highlighted temperature-spans in the image. They help to define which temperature corresponds to which color. The Lower limit denotes the temperature where the colored part of the palette will start and all temperatures above this limit will stand out.
Spot temperature reading
This capability is used to view the temperature of a particular area of the image. The emissivity can also be adjusted (depending on the material characteristics) to get a more precise reading. Used as a visual aid for an operator
For a list of emissivity for different material, see here
More features
- MicroSD/SDHC memory card slot
- Network security using multiple user access levels, IP address filtering, HTTPS encryption, IEEE 802.1X authentication
- Supports Quality of Service (QoS) which helps secure the necessary bandwidth for streaming video and control commands over a network
- Supports Internet Protocol version 6 (IPv6) in addition to IP version 4 (IPv4)

Currently viewing: Axis Q2901-E 9MM 8.3 FPS 0645-001 - eet01
Categories
Customer Testimonials
Mr
My del 2330dn printer has being faulty for a while and they are quiet expensive to replace,as i work ...

(read more)
By Paul Taylor

Mr
Many thanks for the Canon ip 5200 printer and the printhead for it which you also provided. All arri ...

(read more)
By Eddy Harris


We bought a printer off Athema at gone 4pm and it was still delivered before 10am the next day, exce ...

(read more)
By Dominic Adshead

milborrow chimney sweeps
Wonderful service in a time of need .. We had a breakdown of our computer and phoned the order li ...

(read more)
By kevin giddings


Very prompt and reliable service. Would definitely recommend and will be using Athema again.

(read more)
By Steve Church

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: