1 Channel Video Encoder. Multiple, Individually Configurable H.264 And Motion JPEG Streams, Max. D1 Resolution At 30/25 Fps. Video Motion Detection. Active Tampering Alarm. Two-way Audio And - C2000
[0288-002]



Part Number: 0288-002

Manufacturer: Axis

Condition: New

Short Description:

1 Channel Video Encoder. Multiple, Individually Configurable H.264 And Motion JPEG Streams, Max. D1 Resolution At 30/25 Fps. Video Motion Detection. Active Tampering Alarm. Two-way Audio And Audio Detection. Power Over Ethernet (IEEE 802.3af) With Power 0288-002

1 Channel Video Encoder. Multiple, Individually Configurable H.264 And Motion JPEG Streams, Max. D1 Resolution At 30/25 Fps. Video Motion Detection. Active Tampering Alarm. Two-way Audio And  - C2000

£288.00
£345.60 - Inc VAT




Click the Like Button below to see the latest discount:

-Superb video quality.
-Multiple H.264 streams.
-Image setting adjustment.
-Intelligent video capabilities.
-Power over Ethernet.
-Audio support.
-Local storage.
High performance, single channel solution
AXIS Q7401 Video Encoder is a high performance, single channel solution that integrates an analog camera into an IP-based video surveillance system. With outstanding video processing capabilities, AXIS Q7401 delivers superb video quality and significant savings in bandwidth and storage.
Reduced bandwidth and storage needs
AXIS Q7401 offers the highly efficient H.264 video compression, which drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is also supported for increased flexibility.
Full frame rate in all resolutions
AXIS Q7401 can deliver multiple, individually configurable video streams simultaneously at full frame rate in all resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). This means that several video streams can be configured with different compression formats, resolutions and frame rates for different needs.
Wide range of analog PTZ cameras supported
All Axis video encoders connect to analog pan/tilt/zoom (PTZ) cameras to allow for easy operation of these PTZ cameras across the IP network. Axis' open policy ensures simple and fast integration with most analog PTZ cameras on the market by including software drivers for more than 25 different analog cameras, including products from American Dynamics, Bosch, Canon, Panasonic, Pelco, Philips, Samsung, Sensormatic and Sony.
Easy installation
Support for Power over Ethernet (IEEE802.3af) enables the unit, as well as the analog camera that is connected to it, to receive power through the same cable as for data transmission. This makes for easy installation since no power outlet is needed.
More features
-Intelligent capabilities such as enhanced video motion detection, active tampering alarm and audio detection.
-External inputs and outputs that can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate lights or open/close doors.
-Image setting adjustment to improve images before encoding takes place.
-Two-way audio support.
-SD/SDHC memory card slot for local storage.
-Open Application Programming Interface (API) for software integration, including VAPIX® from Axis Communications.

Reviews

Specs

Camera
Rotation 90°
Angle of rotation 90°
Video
Maximum resolution 720 x 576 pixels
Video formats supported H.264
Frame rate 30 fps
Networking
Supported network protocols IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Security
Video motion detection Y
Active tampering alarm Y
IP address filtering Y
Power
Power over Ethernet (PoE) support Y
Power consumption (typical) 7.2 W
DC-in jack Y
Power over Ethernet (PoE) Y
Ports & interfaces
Microphone in Y
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Operating relative humidity (H-H) 20 - 80%
Weight & dimensions
Weight 335 g
Other features
Power requirements 8-20 V DC
Dimensions (WxDxH) 118 x 98.9 x 10.7 mm
Pre/post alarm buffer 64 MB
I/O ports BNC, NTSC/PAL,\nRJ-45,\nDC,\n2x3.5 mm,\nRS-485/RS-422.
Storage
Compatible memory cards SD,SDHC
Flash memory 128 MB
Internal memory 128 MB
Performance
Built-in processor ARTPEC-3
Processor model ARTPEC-3

Features

Axis Q7401 Video Encoder. Processor model: ARTPEC-3. Maximum resolution: 720 x 576 pixels, Video formats supported: H.264, Frame rate: 30 fps. Angle of rotation: 90°. Compatible memory cards: SD,SDHC, Flash memory: 128 MB, Internal memory: 128 MB. Supported network protocols: IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, Dy

Product Description

-Superb video quality.
-Multiple H.264 streams.
-Image setting adjustment.
-Intelligent video capabilities.
-Power over Ethernet.
-Audio support.
-Local storage.
High performance, single channel solution
AXIS Q7401 Video Encoder is a high performance, single channel solution that integrates an analog camera into an IP-based video surveillance system. With outstanding video processing capabilities, AXIS Q7401 delivers superb video quality and significant savings in bandwidth and storage.
Reduced bandwidth and storage needs
AXIS Q7401 offers the highly efficient H.264 video compression, which drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is also supported for increased flexibility.
Full frame rate in all resolutions
AXIS Q7401 can deliver multiple, individually configurable video streams simultaneously at full frame rate in all resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). This means that several video streams can be configured with different compression formats, resolutions and frame rates for different needs.
Wide range of analog PTZ cameras supported
All Axis video encoders connect to analog pan/tilt/zoom (PTZ) cameras to allow for easy operation of these PTZ cameras across the IP network. Axis' open policy ensures simple and fast integration with most analog PTZ cameras on the market by including software drivers for more than 25 different analog cameras, including products from American Dynamics, Bosch, Canon, Panasonic, Pelco, Philips, Samsung, Sensormatic and Sony.
Easy installation
Support for Power over Ethernet (IEEE802.3af) enables the unit, as well as the analog camera that is connected to it, to receive power through the same cable as for data transmission. This makes for easy installation since no power outlet is needed.
More features
-Intelligent capabilities such as enhanced video motion detection, active tampering alarm and audio detection.
-External inputs and outputs that can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate lights or open/close doors.
-Image setting adjustment to improve images before encoding takes place.
-Two-way audio support.
-SD/SDHC memory card slot for local storage.
-Open Application Programming Interface (API) for software integration, including VAPIX® from Axis Communications.

Currently viewing: 1 Channel Video Encoder. Multiple, Individually Configurable H.264 And Motion JP
Categories
Customer Testimonials

Dealt with these guys for the first time this year. Good price, shipped quickly and subsequent suppo ...

(read more)
By Paul Strawbridge


Very prompt and reliable service. Would definitely recommend and will be using Athema again.

(read more)
By Steve Church

HP 19" Monitor Ex-Demo A1 condition
On monday evening I ordered this monitor having found Athema through a price comparison website, I w ...

(read more)
By Ellen K

Mr
Unusual to find a Website with as much detail as this. Obviously proud and confident of their servic ...

(read more)
By Adams


I was looking online for an Axis night fixed dome network camera and found Athema Services Ltd, th ...

(read more)
By Adam Hinsley

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: