Cisco ASA 5555-X - Security Appliance - 8 Ports - GigE - 1U - Rack-mountable - With FirePOWER Services ASA5555-FPWR-K9 - C2000
[ASA5555-FPWR-K9]

TEMPORARILY OUT OF STOCK


Part Number: ASA5555-FPWR-K9

Manufacturer: CISCO

Condition: New

Short Description:

Cisco ASA 5555-X - Security Appliance - 8 Ports - GigE - 1U - Rack-mountable - With FirePOWER Services ASA5555-FPWR-K9

Cisco ASA 5555-X - Security Appliance - 8 Ports - GigE - 1U - Rack-mountable - With FirePOWER Services ASA5555-FPWR-K9 - C2000

£10,917.00
£13,100.40 - Inc VAT




PLEASE TYPE IN THE PART NUMBER IN THE SEARCH BOX
Click the Like Button below to see the latest discount:

Problem Description
ASA 5500-X security appliances that shipped from March 16, 2012 through June 11, 2012 contain the incorrect factory default configuration. This requires the user to follow special procedures for system initialization.
Background
The ASA 5500-X appliances shipped from March 16, 2012 through June 11, 2012 were not loaded with the correct factory default configuration and must be initialized using special commands. The procedures contained in the Quick Start Guide are insufficient to properly initialize the affected units.
Problem Symptoms
Users attempting to initialize the affected ASA 5500-X appliances using the Quick Start Guide will observe that the management 0/0 ports are in the down/down condition. In addition, ASDM for on box management is not accessible.
Workaround/Solution
The factory default configuration can be applied using the following command:
config factory-default
Note that the ASA 5515-X appliance does not support the command above due to Cisco bug ID CSCtz73669. The unit must be restored to the factory default configuration using the command series shown below.

Reviews

Specs

Ports & interfaces
Connectivity technology Wired
Gigabit Ethernet (copper) ports quantity 6
USB 2.0 ports quantity 2
Serial ports quantity 1
Networking
Wi-Fi N
Number of VPN connections 5000
Number of users 5000 user(s)
Number of VLANs 500
Memory
Internal memory 16384 MB
Power
AC input voltage 100-240 V
AC input frequency 50 Hz
Input current 15
Power consumption (typical) 90 W
Peak power 134 W
Redundant power supply (RPS) support Y
Number of power supply units 1
Operational conditions
Operating temperature (T-T) -5 - 40 °C
Storage temperature (T-T) -25 - 70 °C
Operating relative humidity (H-H) 10 - 90%
Storage relative humidity (H-H) 10 - 90%
Operating altitude 0 - 3048 m
Non-operating altitude 0 - 4572 m
Weight & dimensions
Dimensions (WxDxH) 429 x 484 x 42.4 mm
Weight 7.63 kg
Security
Security algorithms 3DES,AES
Management features
LED indicators Y
Data transmission
Firewall throughput 2000 Mbit/s
Data transfer rate (max) 4000 Mbit/s
VPN throughput 700 Mbit/s
IPS/IDS throughput 1300
Mobile VPN IPSec 5000
Mobile VPN SSL 2
Maximum firewall connections per second 50000
Storage
Storage media type SSD
RAID levels 1
Number of hard drives installed 2
Total storage capacity 240 GB
Solid-state drive capacity 120 GB
RAID support Y
Performance
Heat dissipation 458 BTU/h
Concurrent connections 1000000
Noise level 67.9 dB
Design
Rack mounting Y
Form factor 1U
Built-in display N

Related Products

Refurbished Printers

Features

Cisco ASA 5555-X. Firewall throughput: 2000 Mbit/s, Data transfer rate (max): 4000 Mbit/s, VPN throughput: 700 Mbit/s. Number of users: 5000 user(s). Connectivity technology: Wired. Security algorithms: 3DES,AES. AC input voltage: 100-240 V, AC input frequency: 50 Hz, Power consumption (typical): 90 W

Product Description

Problem Description
ASA 5500-X security appliances that shipped from March 16, 2012 through June 11, 2012 contain the incorrect factory default configuration. This requires the user to follow special procedures for system initialization.
Background
The ASA 5500-X appliances shipped from March 16, 2012 through June 11, 2012 were not loaded with the correct factory default configuration and must be initialized using special commands. The procedures contained in the Quick Start Guide are insufficient to properly initialize the affected units.
Problem Symptoms
Users attempting to initialize the affected ASA 5500-X appliances using the Quick Start Guide will observe that the management 0/0 ports are in the down/down condition. In addition, ASDM for on box management is not accessible.
Workaround/Solution
The factory default configuration can be applied using the following command:
config factory-default
Note that the ASA 5515-X appliance does not support the command above due to Cisco bug ID CSCtz73669. The unit must be restored to the factory default configuration using the command series shown below.

Currently viewing: Cisco ASA 5555-X - Security Appliance - 8 Ports - GigE - 1U - Rack-mountable - W
Categories
Customer Testimonials
Partner
Exactly what they advertised & fast delivery

(read more)
By Sean

Excellent service from start to finish
Excellent service from start to finish. Printer exactly as described, delivered on time, affordable ...

(read more)
By Richard Witheridge


I purchased my Refurbished Printer from Athema Services and am very happy with it, it's performing a ...

(read more)
By Iam Thompson

Mr
Very pleased with the new monitor (Samsung S27B750) quick service and pleasant staff. Many thanks

(read more)
By Andrew Avent


Great site and great service, especially the after sales service. Once I had received the printer an ...

(read more)
By Elliot Wald

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: