Dgs-3420-28pc D-link Dgs-3420-28pc Network Switch - Ent01
[DGS-3420-28PC]



Part Number: DGS-3420-28PC

Manufacturer: dlink

Condition: New

Short Description:

Dgs-3420-28pc D-link Dgs-3420-28pc Network Switch

Dgs-3420-28pc D-link Dgs-3420-28pc Network Switch - Ent01

£1,143.00
£1,371.60 - Inc VAT




Click the Like Button below to see the latest discount:

Unparalleled Flexibility
Easily deployed and simple to manage, the DGS-3420 can be virtually stacked with any switch that supports D-Link’s Single IP Management (SIM) to form a multi-level network structured with backbone and centralised high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling.
Redundant Ring Stacking
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack1. Switches in the stack are hot-swappable to minimise network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables** allowing high bandwidth and high port densities on the already cost efficient DGS-3420 Series.
Security, Performance & Availability
The DGS-3420 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers.
The DGS-3420 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as VoIP, ERP, Intranet, and video conferencing are served with proper priority. The DGS-3420 Series provides D-Link’s Safeguard Engine to increase the switch’s reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine tuning of service types based on specific IP addresses or protocols.
IPv6 Technology
The DGS-3420 Series also features comprehensive IPv6 support, including IPv6 Tunnelling, ICMPv6, DHCPv6, RIPng, etc. With 10-Gigabit connectivity and IPv6 support, the DGS-3420 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements for IPv6 capable network devices in the coming years.
D-Link Green Technology
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3420 Series implements the D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power saving feature automatically powers down ports that have no active link. The Smart Fan feature allows for the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable and eco-friendly operation of the switch. The Time Based PoE feature allows to create a schedule when the PoE delivery can be disabled and save more energy.
Features
- 24 Gigabit PoE+ ports, 4 SFP Combo ports and Four 10Gigabit SFP+ ports
- Supports 802.3af (PoE) and 802.3at (PoE Plus) on all ports*
- Physical stacking up to 12 units, virtual up to 32
- Web-based GUI for easy management
- Comprehensive security features, including Microsoft NAP
- Comprehensive IPv6 support
- Green technology – Power-saving mode, time-based PoE, Smart Fans
- Limited Lifetime Warranty
- Advance Warranty Replacement (24 Hour Cross-shipment)

Reviews

Specs

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 28, 24, 28
SFP/SFP+ slots quantity 4
SFP module slots quantity 4
SFP+ module slots quantity 4
Console port RJ-45
Gigabit Ethernet (copper) ports quantity 24
Networking
Networking standards IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1v, IEEE 802.1w, IEEE 802.3ah, IEEE 802.3x
Flow control support Yes
Port mirroring Yes
Broadcast storm control Yes
DHCP client Yes
DHCP server Yes
IP routing Yes
IGMP snooping Yes
Spanning tree protocol Yes
Routing entries 1000
10G support Yes
VLAN support Yes
Power
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (typical) 478 W
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 10 - 90%
Storage relative humidity (H-H) 5 - 90%
Weight & dimensions
Width 44.1 cm
Depth 38 cm
Height 4.4 cm
Weight 5.75 kg
Security
MAC address filtering Yes
Access Control List (ACL) Yes
SSH/SSL support Yes
Data transmission
MAC address table 16000 entries
Switching capacity 128 Gbit/s
Number of VLANs 4000
Jumbo frames support Yes
Management features
Switch type Managed
Switch layer L2+
Quality of Service (QoS) support Yes
Multicast support Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE) Yes
Design
Rack mounting Yes
Performance
Noise level 52.8 dB
Packet buffer memory 2 MB
Mean time between failures (MTBF) 20619 h

Features

D-Link DGS-3420-28PC. Switch type: Managed, Switch layer: L2+. Basic switching RJ-45 Ethernet ports quantity: 28, 24, 28, Console port: RJ-45. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1v, IEEE 802.1w, IEEE 802.3ah, IEEE 802.3x. MAC address table: 16000 entries, Switching capacity: 128 Gbit/s. Noise level: 52.8 dB, Packet buffer memory: 2 MB, Mean time between failures (MTBF): 20619 h

Product Description

Unparalleled Flexibility
Easily deployed and simple to manage, the DGS-3420 can be virtually stacked with any switch that supports D-Link’s Single IP Management (SIM) to form a multi-level network structured with backbone and centralised high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling.
Redundant Ring Stacking
Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack1. Switches in the stack are hot-swappable to minimise network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables** allowing high bandwidth and high port densities on the already cost efficient DGS-3420 Series.
Security, Performance & Availability
The DGS-3420 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers.
The DGS-3420 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as VoIP, ERP, Intranet, and video conferencing are served with proper priority. The DGS-3420 Series provides D-Link’s Safeguard Engine to increase the switch’s reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms or virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine tuning of service types based on specific IP addresses or protocols.
IPv6 Technology
The DGS-3420 Series also features comprehensive IPv6 support, including IPv6 Tunnelling, ICMPv6, DHCPv6, RIPng, etc. With 10-Gigabit connectivity and IPv6 support, the DGS-3420 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements for IPv6 capable network devices in the coming years.
D-Link Green Technology
D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3420 Series implements the D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power saving feature automatically powers down ports that have no active link. The Smart Fan feature allows for the built-in fans to automatically turn on at a certain temperature, providing continuous, reliable and eco-friendly operation of the switch. The Time Based PoE feature allows to create a schedule when the PoE delivery can be disabled and save more energy.
Features
- 24 Gigabit PoE+ ports, 4 SFP Combo ports and Four 10Gigabit SFP+ ports
- Supports 802.3af (PoE) and 802.3at (PoE Plus) on all ports*
- Physical stacking up to 12 units, virtual up to 32
- Web-based GUI for easy management
- Comprehensive security features, including Microsoft NAP
- Comprehensive IPv6 support
- Green technology – Power-saving mode, time-based PoE, Smart Fans
- Limited Lifetime Warranty
- Advance Warranty Replacement (24 Hour Cross-shipment)

Currently viewing: Dgs-3420-28pc D-link Dgs-3420-28pc Network Switch - Ent01
Categories
Customer Testimonials
Great Service
Great service - quick, efficient and helpful!

(read more)
By Daniel McCarthy

Mr.
We ordered a reconditioned Xerox printer. The level of service was excellent with a pre-shipping tel ...

(read more)
By Patrick Collins

Mr
Created account and placed order within 5 minutes. Was placed late Thursday, goods despatched out on ...

(read more)
By Neil Harrington


Great company to deal with, very happy with the service and product.

(read more)
By Steve Marshall

Mr
First of all I found the website clear and impressive, it gave a very good description and specifica ...

(read more)
By George Tibble

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: