Dl-common Accessories Powerscan Pm M9500 Dpm 433 Mhz High Den./directpart/rem. Bat. In Pm9500-dpm433rb
[PM9500-DPM433RB]



Part Number: PM9500-DPM433RB

Manufacturer: Dl

Condition: New

Short Description:

Dl-common Accessories Pm9500-dpm433rb Powerscan Pm M9500 Dpm 433 Mhz

Dl-common Accessories            Powerscan Pm M9500 Dpm 433 Mhz      High Den./directpart/rem. Bat.   In Pm9500-dpm433rb

£630.00
£756.00 - Inc VAT




Click the Like Button below to see the latest discount:

Direct Part Marking (DPM) is a process that allows users to imprint a bar code directly on an item instead of printing the code on a paper label. Different technologies are available to directly mark objects: laser / chemical etching, dot peening and ink jet printing. Each of these methods has specific advantages and disadvantages in terms of durability, cost and ease of reading.
The PowerScan™ PM9500-DPM reader is a cordless rugged handheld area imager specifically addressed and capable of reading codes marked with DPM.
The PowerScan PM9530-DPM imager includes the latest optics and software from Datalogic to make the reading of codes marked with DPM technology easy and intuitive. The typical reading distance is from contact to 4-5 cm / 1.5-1.9 in, depending on the DPM technology used, the code resolution, and the material and surface type. The scanner is also capable of reading standard bar codes printed on labels. It is based on a high density optic which allows the capture of very small, high-resolution codes in a range from near contact up to 15.0 cm / 5.9 in.
The PowerScan PM9500-DPM imager is equipped with Datalogic’s STAR Cordless System™ 2.0, which is available in 433 MHz or 910 MHz. Additionally, it features ‘backwards compatibility’, making it compatible with the current PowerScan STAR radio technology.
The intuitive aiming system allows the highest first-pass reading rate. Additionally, the PowerScan PM9500-DPM area imager uses a soft-pulsed white illumination light resulting in reduced flashes, which is very gentle on users’ eyes.
Datalogic’s Motionix™ motion-sensing technology detects the natural actions of the operator to automatically switch the scanner into the desired scanning mode.
Features:
- Supports any kind of DPM code
- Snappy omnidirectional reading
- Intuitive aiming system
- Soft white light illumination
- STAR Cordless System™ available in 433 MHz or 910 MHz
- Datalogic’s Motionix™ motion-sensing technology
- Image capture
- Datalogic’s 3GL™ (3 Green Lights) technology and loud beeper for good-read feedback
- EASEOFCARE Service Plans offer a wide range of service options to protect your investment, ensuring maximum productivity and ROI

Reviews

Specs

Weight & dimensions
Width 11 cm
Depth 7.4 cm
Height 21.2 cm
Weight 380g
Operational conditions
Operating temperature (T-T) -20 - 50 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 0 - 95%
Power
Power source type Battery
Battery capacity 2150 mAh
Number of reads per charge 30000
Battery life 10h
Charging time 4h
Ports & interfaces
Connectivity technology Wired & Wireless
Interface USB + RS-232
Operating frequency 433 MHz
Scanning
Sensor type Laser
2D (matrix & stacked) barcodes supported Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Tilt reading angle 0 - 360°
Pitch reading angle -40 - 40°
Yaw reading angle -40 - 40°
Design
Colour of product Black, Yellow
Type Handheld
International Protection (IP) code IP65
Protection features Shock resistant, Water resistant
Certification IEC 62471 Class 1 LED

Related Products

Refurbished Printers

Features

Datalogic PowerScan PM9500-DPM. Sensor type: Laser, 2D (matrix & stacked) barcodes supported: Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code, Tilt reading angle: 0 - 360°. Connectivity technology: Wired & Wireless, Interface: USB + RS-232, Operating frequency: 433 MHz. Colour of product: Black, Yellow, Type: Handheld, International Protection (IP) code: IP65. Power source type: Battery, Battery capacity: 2150 mAh, Battery life: 10h. Width: 11 cm, Depth: 7.4 cm, Height: 21.2 cm

Product Description

Direct Part Marking (DPM) is a process that allows users to imprint a bar code directly on an item instead of printing the code on a paper label. Different technologies are available to directly mark objects: laser / chemical etching, dot peening and ink jet printing. Each of these methods has specific advantages and disadvantages in terms of durability, cost and ease of reading.
The PowerScan™ PM9500-DPM reader is a cordless rugged handheld area imager specifically addressed and capable of reading codes marked with DPM.
The PowerScan PM9530-DPM imager includes the latest optics and software from Datalogic to make the reading of codes marked with DPM technology easy and intuitive. The typical reading distance is from contact to 4-5 cm / 1.5-1.9 in, depending on the DPM technology used, the code resolution, and the material and surface type. The scanner is also capable of reading standard bar codes printed on labels. It is based on a high density optic which allows the capture of very small, high-resolution codes in a range from near contact up to 15.0 cm / 5.9 in.
The PowerScan PM9500-DPM imager is equipped with Datalogic’s STAR Cordless System™ 2.0, which is available in 433 MHz or 910 MHz. Additionally, it features ‘backwards compatibility’, making it compatible with the current PowerScan STAR radio technology.
The intuitive aiming system allows the highest first-pass reading rate. Additionally, the PowerScan PM9500-DPM area imager uses a soft-pulsed white illumination light resulting in reduced flashes, which is very gentle on users’ eyes.
Datalogic’s Motionix™ motion-sensing technology detects the natural actions of the operator to automatically switch the scanner into the desired scanning mode.
Features:
- Supports any kind of DPM code
- Snappy omnidirectional reading
- Intuitive aiming system
- Soft white light illumination
- STAR Cordless System™ available in 433 MHz or 910 MHz
- Datalogic’s Motionix™ motion-sensing technology
- Image capture
- Datalogic’s 3GL™ (3 Green Lights) technology and loud beeper for good-read feedback
- EASEOFCARE Service Plans offer a wide range of service options to protect your investment, ensuring maximum productivity and ROI

Currently viewing: Dl-common Accessories Powerscan Pm M9500 Dpm 433 Mhz High Den./d
Categories
Customer Testimonials

Athema Services Ltd provide a truly excellent customer service and make every effort in making sure ...

(read more)
By Dave Smith


We have been purchasing papers from Athema Services Ltd since 2008. | Items Price: Competitively Che ...

(read more)
By Di Gong


I would like to thank Darren at Athema for all his help in gettin our printer repaired. Will use ag ...

(read more)
By Jennifer Bailey


HP Laserjet 2200 DT arrived very well packed and in perfect condition. The unit operates as new and ...

(read more)
By Simon Griffiths


I was looking online for an Axis night fixed dome network camera and found Athema Services Ltd, th ...

(read more)
By Adam Hinsley

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: