GSM7248-200EUS Netgear ProSafe 48-Port Gigabit L2 Managed Switch - C2000
[GSM7248-200EUS]



Part Number: GSM7248-200EUS

Manufacturer: Netgear

Condition: New

Short Description:

GSM7248-200EUS Netgear ProSafe 48-Port Gigabit L2 Managed Switch

GSM7248-200EUS Netgear ProSafe 48-Port Gigabit L2 Managed Switch - C2000

£392.00
£470.40 - Inc VAT




Click the Like Button below to see the latest discount:

Up to 48 Switches Can Be Managed Via a Single IP Address!
NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 or 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP) gigabit interfaces. Layer 2 management functionality delivers reliability, control, and availability. Static routing enables inter-VLAN routing and provides a faster network and more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based QoS provides enhanced traffic management capabilities. The cost-effective NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch creates a more productive — and future-proof — network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today’s high-performance environments.
Multiple NETGEAR fully managed switches can be managed via a single IP address. Optimize bandwidth, security, and control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth and throughput.
Powerful
Full 24 or 48 10/100/1000 ports and a non-blocking design provide wire speed throughput and maximum bandwidth for the most demanding network environments. Small form-factor pluggable (SFP) modules deliver choice in 1000BASE-SX, 1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer 2 management features optimize bandwidth throughout the network – delivering Gigabit performance to systems, applications, and services. Take advantage of forwarding rates up to 71.4 million pps, and a switching capacity of 96 Gbps.
Easy to Use
Move up to Gigabit power in minutes. Use either of these solutions as a managed switch out of the box – just plug and play! All ports are auto-negotiating and support Auto Uplink™ technology. Choose from two easy-to-use management interface options –Web interface or a command line interface available through console or telnet. Comprehensive remote administration capabilities reduce the need for on-site administration. Easy to troubleshoot – built-in testing capability locates cable-related network problems. Additionally, up to 48 switches can be managed via a single IP address using the Web GUI interface.
Manageable
Meet your management needs with SNMP (v1, v2c and v3), RMON, Command Line Interface (CLI) and completely redesigned Web-based GUI, ProSafe Control Center. Advanced features include up to 512 VLANs, DiffServ traffic prioritization and 802.1p (QoS) for Voice over IP services (VoIP), broadcast storm protection, RADIUS, 802.1x, port trunking, Rapid Spanning Tree, and link aggregation. In addition, L2-L4 based ACLs provide robust security, while static routing enables inter-VLAN routing for effective bandwidth management. Full Layer 2 implementation allows you to configure your network for maximum performance, reliability, and availability. Manageable with any popular SNMP-based management software, but optimized for NETGEAR ProSafe Network Management Software NMS100.
Outstanding
These products offer Layer 2 management and full Gigabit power at a compelling price. Use at the edge to improve workgroup connections, or at the core to upgrade a Gigabit Ethernet backbone — now you can afford the power your network deserves. Like all NETGEAR products, everything you need is in the box – including rack-mount kit, power and serial cables, and more.

Reviews

Specs

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 48
SFP/SFP+ slots quantity 4
Console port RS-232
Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-T
Gigabit Ethernet (copper) ports quantity 48
Networking
Networking standards IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Flow control support Y
Port mirroring Y
Link aggregation Y
Broadcast storm control Y
Rate limiting Y
DHCP client Y
DHCP server Y
IGMP snooping Y
Spanning tree protocol Y
Power
Input voltage 12V
Operational conditions
Operating temperature (T-T) 32 - 131 °F
Storage temperature (T-T) -20 - 70 °C
Operating relative humidity (H-H) 0 - 90%
Storage relative humidity (H-H) 0 - 95%
Operating altitude 0 - 3000m
Weight & dimensions
Weight 4.15 kg
Security
MAC address filtering Y
Access Control List (ACL) Y
SSH/SSL support Y
Data transmission
MAC address table 8000 entries
Supported data transfer rates 10/100/1000 Mbps
Store-and-forward Y
Number of VLANs 1024
Number of queues 8
Maximum data transfer rate 1 Gbit/s
Jumbo frames support Y
Management features
Switch layer L2+
Switch type Managed
MIB support RFC 1213, RFC 1493, RFC 1643
Quality of Service (QoS) support Y
Multicast support Y
Web-based management Y
Protocols
Management protocols SNMPv1, v2c, v3, IGMP v1, v2, v3, DHCP
Data link protocols Ethernet, Fast Ethernet, Gigabit Ethernet
Supported network protocols SNTP, RMON 1, 2, 3, 9, BOOTP, HTTP & HTTPS, LLDP, LLDP-MED, GARP, GVRP, GMRP, TFTP, SFTP, SCP
Other features
Latency 20 us
Dimensions (WxDxH) 440 x 205 x 43 mm
Connectivity technology Wired
Bandwidth 48 Gbit/s
Power supply 71.5W
Networking features Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity LEDs Y
Electromagnetic emissions CE, EN 55022 Class A, EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick
Weight 4.14 kg (9.13 lbs)
Dimensions (W x D x H) 439.4 x 205.7 x 40.6 mm (17.3 x 8.1 x 1.6")
Power over Ethernet (PoE)
Power over Ethernet (PoE) support N
Design
Rack mounting Y
Safety CE, EN 60950-1, UL/cUL 60950-1
Performance
Stackable N
Internal memory 128 MB
Flash memory 32 MB
Noise level 48.8 dB
Firmware upgradeable Y
Packet buffer memory 0.75 MB

Features

Netgear GSM7248-200EUS. Switch layer: L2+, Switch type: Managed, MIB support: RFC 1213, RFC 1493, RFC 1643. Console port: RS-232, Copper ethernet cabling technology: 1000BASE-T, 100BASE-TX, 10BASE-T. Networking standards: IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. MAC address table: 8000 entries, Supported data transfer rates: 10/100/1000 Mbps, Maximum data transfer rate: 1 Gbit/s. Management protocols: SNMPv1, v2c, v3, IGMP v1, v2, v3, DHCP, Data link protocols: Ethernet, Fast Ethernet, Gigabit Ethernet, Supported network protocols: SNTP, RMON 1, 2, 3, 9, BOOTP, HTTP & HTTPS, LLDP, LLDP-MED, GARP, GVRP, GMRP, TFTP, SFTP, SCP

Product Description

Up to 48 Switches Can Be Managed Via a Single IP Address!
NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 or 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP) gigabit interfaces. Layer 2 management functionality delivers reliability, control, and availability. Static routing enables inter-VLAN routing and provides a faster network and more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based QoS provides enhanced traffic management capabilities. The cost-effective NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch creates a more productive — and future-proof — network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today’s high-performance environments.
Multiple NETGEAR fully managed switches can be managed via a single IP address. Optimize bandwidth, security, and control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth and throughput.
Powerful
Full 24 or 48 10/100/1000 ports and a non-blocking design provide wire speed throughput and maximum bandwidth for the most demanding network environments. Small form-factor pluggable (SFP) modules deliver choice in 1000BASE-SX, 1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer 2 management features optimize bandwidth throughout the network – delivering Gigabit performance to systems, applications, and services. Take advantage of forwarding rates up to 71.4 million pps, and a switching capacity of 96 Gbps.
Easy to Use
Move up to Gigabit power in minutes. Use either of these solutions as a managed switch out of the box – just plug and play! All ports are auto-negotiating and support Auto Uplink™ technology. Choose from two easy-to-use management interface options –Web interface or a command line interface available through console or telnet. Comprehensive remote administration capabilities reduce the need for on-site administration. Easy to troubleshoot – built-in testing capability locates cable-related network problems. Additionally, up to 48 switches can be managed via a single IP address using the Web GUI interface.
Manageable
Meet your management needs with SNMP (v1, v2c and v3), RMON, Command Line Interface (CLI) and completely redesigned Web-based GUI, ProSafe Control Center. Advanced features include up to 512 VLANs, DiffServ traffic prioritization and 802.1p (QoS) for Voice over IP services (VoIP), broadcast storm protection, RADIUS, 802.1x, port trunking, Rapid Spanning Tree, and link aggregation. In addition, L2-L4 based ACLs provide robust security, while static routing enables inter-VLAN routing for effective bandwidth management. Full Layer 2 implementation allows you to configure your network for maximum performance, reliability, and availability. Manageable with any popular SNMP-based management software, but optimized for NETGEAR ProSafe Network Management Software NMS100.
Outstanding
These products offer Layer 2 management and full Gigabit power at a compelling price. Use at the edge to improve workgroup connections, or at the core to upgrade a Gigabit Ethernet backbone — now you can afford the power your network deserves. Like all NETGEAR products, everything you need is in the box – including rack-mount kit, power and serial cables, and more.

Currently viewing: GSM7248-200EUS Netgear ProSafe 48-Port Gigabit L2 Managed Switch - C2000
Categories
Customer Testimonials
Mr
Fast and Efficient Service. Will be recommended to foes

(read more)
By Yatin


I have been a customer with Athema Services for a few months now and the service I have had is next ...

(read more)
By Nick Boardman

Mrs
I have a HP2600n machine which has been brilliant , but for some reason and coincidentally the ink r ...

(read more)
By Angela McNeela

Mr
Created account and placed order within 5 minutes. Was placed late Thursday, goods despatched out on ...

(read more)
By Neil Harrington


Recently purchased a roll of Epson wide format paper from you , your sales personnel (Darren Longsha ...

(read more)
By Stephen Hooton

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: