Hewlett Packard Enterprise ProCurve 2530-8G-PoE+ Switch **New Retail** J9774A - eet01
[J9774A]



Part Number: J9774A

Manufacturer: hewlett packard enterprise

Condition: New

Short Description:

Hewlett Packard Enterprise ProCurve 2530-8G-PoE+ Switch **New Retail** J9774A

Hewlett Packard Enterprise ProCurve 2530-8G-PoE+ Switch **New Retail** J9774A - eet01

£242.00
£290.40 - Inc VAT




Click the Like Button below to see the latest discount:

The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Cost-Effective, Reliable and Secure Access Layer Switches.
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks. Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode. Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service.
The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication. Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS. Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simple Deployment and Management.
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports. Quiet operation with fanless and variable speed fan models. Flexible deployment with wall, table, and rack mounting options.
Single View of the Network.
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models). Source-port filtering: allows only specified ports to communicate with each other. RADIUS/TACACS+: eases switch management security administration by using a password authentication server. Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator.
LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones. IP multicast (data-driven IGMP): prevents flooding of IP multicast traffic. IEEE 802.1AB Link Layer Discovery Protocol (LLDP): facilitates easy mapping using network management applications with LLDP automated device discovery protocol. PoE and PoE+ allocations: support multiple method (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy use. Voice VLAN: uses LLDP-MED to automatically configure a VLAN for IP phones.
Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration. IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w.

Reviews

Specs

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 10
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Networking
Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Full duplex Yes
Flow control support Yes
Port mirroring Yes
Link aggregation Yes
Rate limiting Yes
Auto MDI/MDI-X Yes
Spanning tree protocol Yes
10G support No
VLAN support Yes
Auto-sensing Yes
Power
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (typical) 86 W
Operational conditions
Heat dissipation 65 BTU/h
Weight & dimensions
Width 25.400 cm
Depth 15.950 cm
Height 4.450 cm
Weight 1 kg
Security
Access Control List (ACL) Yes
SSH/SSL support Yes
Data transmission
MAC address table 16000 entries
Switching capacity 20 Gbit/s
Throughput 14.8 Mpps
Latency (10-100 Mbps) 7.4 µs
Latency (1 Gbps) 2.6 µs
Management features
Switch layer L2
Switch type Managed
MIB support Y
Quality of Service (QoS) support Yes
Multicast support Yes
Web-based management Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE) support Yes
Total Power over Ethernet (PoE) budget 67 W
Design
Rack mounting Yes
Colour of product Grey
Form factor 1U
Performance
Built-in processor ARM9E
Processor frequency 800 MHz
Internal memory 256 MB
Memory type DDR3
Flash memory 128 MB
Packet buffer memory 1.5 MB

Features

Hewlett Packard Enterprise 2530-8G-PoE+. Switch layer: L2, Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000). Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u. MAC address table: 16000 entries, Switching capacity: 20 Gbit/s, Throughput: 14.8 Mpps. Colour of product: Grey, Form factor: 1U

Product Description

The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Cost-Effective, Reliable and Secure Access Layer Switches.
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks. Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode. Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service.
The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication. Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS. Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simple Deployment and Management.
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports. Quiet operation with fanless and variable speed fan models. Flexible deployment with wall, table, and rack mounting options.
Single View of the Network.
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models). Source-port filtering: allows only specified ports to communicate with each other. RADIUS/TACACS+: eases switch management security administration by using a password authentication server. Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch. Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator.
LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones. IP multicast (data-driven IGMP): prevents flooding of IP multicast traffic. IEEE 802.1AB Link Layer Discovery Protocol (LLDP): facilitates easy mapping using network management applications with LLDP automated device discovery protocol. PoE and PoE+ allocations: support multiple method (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy use. Voice VLAN: uses LLDP-MED to automatically configure a VLAN for IP phones.
Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration. IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w.

Currently viewing: Hewlett Packard Enterprise ProCurve 2530-8G-PoE+ Switch **New Retail** J9774A -
Categories
Customer Testimonials
Miss
Good value and fairly quick delivery of a Brother printer. Very quick, polite response when I chased ...

(read more)
By Stock


I would like to thank Darren at Athema for all his help in gettin our printer repaired. Will use ag ...

(read more)
By Jennifer Bailey


Good price very good service.

(read more)
By Ronnie Newton

Mr
We ordered a refurbished printer from Athema Services. It arrived the next day and was very well pac ...

(read more)
By Marc Wachsmann

Mr
Have been having real problems with a series of OfficeJet 100 printers which are the H470 replacemen ...

(read more)
By Jonathan Marshall

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: