Hpe 5130 48g Poe+ 4sfp+ 1-slot Hi Sw Jh326a - WC01
[JH326A]

TEMPORARILY OUT OF STOCK


Part Number: JH326A

Manufacturer: hewlett packard enterprise

Condition: New

Short Description:

Hpe 5130 48g Poe+ 4sfp+ 1-slot Hi Sw Jh326a

Hpe 5130 48g Poe+ 4sfp+ 1-slot Hi Sw Jh326a - WC01

£1,200.00
£1,440.00 - Inc VAT




PLEASE TYPE IN THE PART NUMBER IN THE SEARCH BOX
Click the Like Button below to see the latest discount:

The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency at the access layer of medium and large enterprise campus networks. This FlexNetwork switch supports enterprise class QoS and security, HPE Intelligent Resilient Framework (IRF) stacking, static Layer 3 routing and RIP, dual redundant power supplies, fixed and modular 10GbE uplinks ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.
The 5130 HI Switch Series can be managed with HPE Intelligent Management Center (IMC) Software for a single view of your entire network.
Features
Scalable and Resilient Access Layer Switches
- The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency for medium and large enterprise networks. It supports stacking, dual power supplies; 10GbE uplinks; static and RIP routing; PoE+; ACLs; IPv6 and power savings.
- The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.
- Offers scalable stacking and backhaul capacity with four fixed 10GbE uplinks and slots for two more 10GbE uplinks, including support for 10GBASE-T.
- Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watts of PoE+ for powered cameras, phones and wireless access points.
- No software licensing required.
Improved Quality of Service (Q0S) with Traffic Management
- The HPE FlexNetwork 5130 HI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.
- Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
- Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
Comprehensive Security Control
- The HPE FlexNetwork 5130 HI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater policy-driven application security. Per-user access control lists (ACLs) provide identity-driven security and access control.
- ACLs provide IP Layer 2 to Layer 4 traffic filtering and support global ACL, VLAN ACL, port ACL, and IPv6 ACL.
- Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.
- Supports industry standard MACsec for greater end-point or switch-to-switch security.
Single View of the Network
- The HPE FlexNetwork 5130 HI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Reviews

Specs

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 48
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
SFP+ module slots quantity 4
Networking
Networking standards IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u
10G support Y
Full duplex Y
Flow control support Y
Link aggregation Y
Broadcast storm control Y
DHCP client Y
DHCP server Y
IP routing Y
Auto MDI/MDI-X Y
Spanning tree protocol Y
VLAN support Y
Auto-sensing Y
Power
Power consumption (typical) 75 W
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (max) 670 W
Operational conditions
Operating temperature (T-T) 0 - 45 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 10 - 90%
Storage relative humidity (H-H) 5 - 95%
Weight & dimensions
Width 439.9 mm
Depth 460 mm
Height 43.7 mm
Weight 12.5 kg
Security
Access Control List (ACL) Y
Data transmission
MAC address table 32768 entries
Switching capacity 216 Gbit/s
Throughput 190.5 Mpps
Latency (1 Gbps) 5 µs
Latency (10 Gbps) 3 µs
Jumbo frames support Y
Management features
Switch type Managed
Switch layer L3
Quality of Service (QoS) support Y
Web-based management Y
Power over Ethernet (PoE)
Power over Ethernet (PoE) Y
Total Power over Ethernet (PoE) budget 1440 W
Design
Rack mounting Y
Colour of product Black
Form factor 1U
Performance
Stackable Y
Internal memory 2048 MB
Memory type SDRAM
Flash memory 512 MB
Packet buffer memory 4 MB

Features

Hewlett Packard Enterprise 5130 48G PoE+ 4SFP+ HI with 1 Interface Slot Switch. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000). Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u. MAC address table: 32768 entries, Switching capacity: 216 Gbit/s, Throughput: 190.5 Mpps. Colour of product: Black, Form factor: 1U

Product Description

The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency at the access layer of medium and large enterprise campus networks. This FlexNetwork switch supports enterprise class QoS and security, HPE Intelligent Resilient Framework (IRF) stacking, static Layer 3 routing and RIP, dual redundant power supplies, fixed and modular 10GbE uplinks ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.
The 5130 HI Switch Series can be managed with HPE Intelligent Management Center (IMC) Software for a single view of your entire network.
Features
Scalable and Resilient Access Layer Switches
- The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency for medium and large enterprise networks. It supports stacking, dual power supplies; 10GbE uplinks; static and RIP routing; PoE+; ACLs; IPv6 and power savings.
- The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.
- Offers scalable stacking and backhaul capacity with four fixed 10GbE uplinks and slots for two more 10GbE uplinks, including support for 10GBASE-T.
- Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watts of PoE+ for powered cameras, phones and wireless access points.
- No software licensing required.
Improved Quality of Service (Q0S) with Traffic Management
- The HPE FlexNetwork 5130 HI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.
- Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
- Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.
Comprehensive Security Control
- The HPE FlexNetwork 5130 HI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater policy-driven application security. Per-user access control lists (ACLs) provide identity-driven security and access control.
- ACLs provide IP Layer 2 to Layer 4 traffic filtering and support global ACL, VLAN ACL, port ACL, and IPv6 ACL.
- Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.
- Supports industry standard MACsec for greater end-point or switch-to-switch security.
Single View of the Network
- The HPE FlexNetwork 5130 HI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Currently viewing: Hpe 5130 48g Poe+ 4sfp+ 1-slot Hi Sw Jh326a - WC01
Categories
Customer Testimonials

Excellent service from Athema, purchase delivered in less than 2 days, and at the moment where I liv ...

(read more)
By Lindsay Ross

Mr
Excellent on-line service thankyou

(read more)
By Christopher Sandford

Mr
I found the Athema website easy to use and quick when setting up an account, which stores my deliver ...

(read more)
By Osborn Hull

Mr
I loved my old HP1505n printer and it was a sad day when it finally gave up the ghost. I found Ath ...

(read more)
By Paul Eldred


I've purchased 3 refurbished printers from Athema now and have been very happy with the product. The ...

(read more)
By Mark Griffiths

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: