Kingston 4GB 1333Mz DDR3 NonECC CL9 DIMM SR x8 KVR13N9S8/4 - eet01
[KVR13N9S8/4]



Part Number: KVR13N9S8/4

Manufacturer: Kingston

Condition: New

Short Description:

Kingston 4GB 1333Mz DDR3 NonECC CL9 DIMM SR x8 KVR13N9S8/4

Kingston 4GB 1333Mz DDR3 NonECC CL9 DIMM SR x8 KVR13N9S8/4 - eet01

£32.00
£38.40 - Inc VAT




Click the Like Button below to see the latest discount:

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Reviews

Specs

Memory
Internal memory 4 GB
Internal memory type DDR3
Memory clock speed 1333 MHz
ECC N
Memory form factor 240-pin DIMM
Memory layout (modules x size) 1 x 4 GB
CAS latency 9
Memory voltage 1.5 V
Registered No
Memory bus 64 bit
Lead plating Gold
Module configuration 512M x 64
Package type DIMM
Unbuffered memory Y
Memory ranking 1
Component for PC/server
Row cycle time 49.125 ns
Refresh row cycle time 260 ns
Row active time 36 ns
SPD profile Y
Weight & dimensions
Width 133.3 mm
Height 30 mm
Operational conditions
Operating temperature (T-T) 0 - 85 °C
Storage temperature (T-T) -55 - 100 °C
Other features
Chips organisation X8
Bus clock rate 1333 MHz
Error indication Non-ECC
Rack mounting 240-pin DIMM
Memory layout 1 x 4096 MB
Internal memory 4096 MB
Warranty Lifetime
Design
Colour of product green

Features

Kingston Technology KVR13N9S8/4, ValueRAM. Internal memory: 4 GB, Internal memory type: DDR3, Memory clock speed: 1333 MHz. Colour of product: green. Width: 133.3 mm, Height: 30 mm

Product Description

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Currently viewing: Kingston 4GB 1333Mz DDR3 NonECC CL9 DIMM SR x8 KVR13N9S8/4 - eet01
Categories
Customer Testimonials

Really good service, great deal and fast delivery.

(read more)
By Stu

MD
When I could not source the product, Athema could, at a good price and delivered. Recommended!

(read more)
By Adam Chetnik

Mr
Ordered hp laserjet 1080 printer on Friday. received it on the following Monday, good prompt deliver ...

(read more)
By Nick Owen

Mr
My del 2330dn printer has being faulty for a while and they are quiet expensive to replace,as i work ...

(read more)
By Paul Taylor

Great Service
Athema Services offered the model I was looking for at the best price I could find. Further more, I ...

(read more)
By Simon

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: