Kvr13n9s8/4 Kingston Valueram 4gb (1x4gb) Ddr3 1333mhz Non-ecc 240-pin Unbuffered Dimm Memory Module Sr X8 - Ent01
[KVR13N9S8/4]

TEMPORARILY OUT OF STOCK


Part Number: KVR13N9S8/4

Manufacturer: Kingston

Condition: New

Short Description:

Kvr13n9s8/4 Kingston Valueram 4gb (1x4gb) Ddr3 1333mhz Non-ecc 240-pin Unbuffered Dimm Memory Module Sr X8

Kvr13n9s8/4 Kingston Valueram 4gb (1x4gb) Ddr3 1333mhz Non-ecc 240-pin Unbuffered Dimm Memory Module Sr X8 - Ent01

£22.00
£26.40 - Inc VAT




PLEASE TYPE IN THE PART NUMBER IN THE SEARCH BOX
Click the Like Button below to see the latest discount:

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Reviews

Specs

Memory
Internal memory 4 GB
Internal memory type DDR3
Memory clock speed 1333 MHz
ECC N
Memory form factor 240-pin DIMM
Memory layout (modules x size) 1 x 4 GB
CAS latency 9
Memory voltage 1.5 V
Registered No
Memory bus 64 bit
Lead plating Gold
Module configuration 512M x 64
Package type DIMM
Unbuffered memory Y
Memory ranking 1
Component for PC/server
Row cycle time 49.125 ns
Refresh row cycle time 260 ns
Row active time 36 ns
SPD profile Y
Weight & dimensions
Width 133.3 mm
Height 30 mm
Operational conditions
Operating temperature (T-T) 0 - 85 °C
Storage temperature (T-T) -55 - 100 °C
Other features
Chips organisation X8
Bus clock rate 1333 MHz
Error indication Non-ECC
Rack mounting 240-pin DIMM
Memory layout 1 x 4096 MB
Internal memory 4096 MB
Warranty Lifetime
Design
Colour of product green

Features

Kingston Technology KVR13N9S8/4, ValueRAM. Internal memory: 4 GB, Internal memory type: DDR3, Memory clock speed: 1333 MHz. Colour of product: green. Width: 133.3 mm, Height: 30 mm

Product Description

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Currently viewing: Kvr13n9s8/4 Kingston Valueram 4gb (1x4gb) Ddr3 1333mhz Non-ecc 240-pin Unbuffere
Categories
Customer Testimonials

We have been purchasing papers from Athema Services Ltd since 2008. | Items Price: Competitively Che ...

(read more)
By Di Gong


Very pleasant and helpful company - I shall be using them again

(read more)
By Viv Frecknall

Mr
Used Athema for the first time as I needed a specific printer that was no longer being manufactured. ...

(read more)
By Robert Milliken


Thorough - an hour after placing the order, I received an email with photos and a phone call, asking ...

(read more)
By PROFESSOR SW HAWKING


Great company to deal with, very happy with the service and product.

(read more)
By Steve Marshall

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: