D-Link DPE-301GI - PoE Injector - 30 Watt DPE-301GI - C2000
[DPE-301GI]



Part Number: DPE-301GI

Manufacturer: D-Link

Condition: New

Short Description:

D-Link DPE-301GI - PoE Injector - 30 Watt DPE-301GI

D-Link DPE-301GI - PoE Injector - 30 Watt DPE-301GI - C2000

£39.00
£46.80 - Inc VAT




Click the Like Button below to see the latest discount:

- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
- Lightweight, compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections
D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.
The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.
The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.
Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.
Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.
Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.
PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

Reviews

Specs

Ports & interfaces
Ethernet LAN (RJ-45) ports 2
DC-in jack Yes
Networking
Ethernet interface type Fast, Gigabit
Ethernet LAN data rates 10,100,1000 Mbit/s
Power over Ethernet (PoE) support Yes
Weight & dimensions
Dimensions (WxDxH) 109.8 x 62.2 x 24.5 mm
Weight 70 g
Power
Output power 32.4 W
AC adapter input voltage 100 - 240 V
AC adapter frequency 50/60 Hz
Output current 0.6 A
Operational conditions
Operating temperature (T-T) 32 - 122 °F
Operating relative humidity (H-H) 5 - 95%
Storage temperature (T-T) -30 - 70 °C
Storage relative humidity (H-H) 5 - 95%
Packaging content
Number of products included 1 pc(s)
Features
Rack mounting No
Colour of product White
LED indicators Yes
Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Certification CE, FCC, VCCI, RCM

Related Products

Refurbished Printers

Features

D-Link DPE-301GI. Ethernet interface type: Fast, Gigabit, Ethernet LAN data rates: 10,100,1000 Mbit/s. Colour of product: White, Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, Certification: CE, FCC, VCCI, RCM. Output power: 32.4 W, AC adapter input voltage: 100 - 240 V, AC adapter frequency: 50/60 Hz. Dimensions (WxDxH): 109.8 x 62.2 x 24.5 mm, Weight: 70 g. Number of products included: 1 pc(s)

Product Description

- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
- Lightweight, compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections
D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.
The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.
The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.
Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.
Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.
Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.
PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

Currently viewing: D-Link DPE-301GI - PoE Injector - 30 Watt DPE-301GI - C2000
Categories
Customer Testimonials
mr
Just purchased a refurbished HP Elitebook 2560p Laptop, Spoke to Darren at Athema and extremely help ...

(read more)
By Darren Clark

Ms
I ordered a printer, it was a very smooth transaction, commuciation is very quick to answer delivery ...

(read more)
By Janie McNicol

Mr
Purchased an ex-demo stand for a 75" Samsung TV Looked brand new & client was very happy Great ...

(read more)
By Paul Sydenham

Mrs
Brilliant service and the product has been amazing. Thank-you so much.

(read more)
By Stephanie Foster


Superb company to deal with. Will be ordering more IT Related products from them.

(read more)
By Neil Hawkins

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: