Optoma X501. Projector brightness: 4500 ANSI lumens, Projection technology: DLP, Projector native resolution: XGA (1024x768). Service life of lamp: 25 h, Bulb power: 310 W, Service life of lamp (economic mode): 400 h. Focal length range (f-f): 20.77 - 31.13 mm, Aperture range (F-F): 2.42 - 2.98, Offset: 115%. Analog signal format system: NTSC, PAL, SECAM 4.25/4.4. Vertical scan range: 25 - 120 Hz, Horizontal scan range: 15 - 91 kHz, Noise level (economic mode): 27 dB
- Extensive features - Full 3D, PC-Free / LAN Presentations
- 4500 lumens, XGA resolution
- Ultimate Control - Full support for Crestron, Extron, AMX, PJ-Link and Telnet LAN commands
- Installation flexibility – 1.6x zoom
High brightness, excellent connectivity and amazing colours ensure the Optoma X501 installation projector is the perfect choice for any large venue or conference room.
Exceeding the demands of 21st century, the X501 is packed with wide array of features to make presenting both easier and more exciting than ever before…
The environmentally friendly X501 has energy saving features including Eco+ lamp power management, <0.5W standby mode and auto power off, saving you both time and money. Our unique Optoma Colour Guarantee ensures hassle-free, long-lasting projection.
Enjoy hassle-free presenting using the USB Reader to project a JPEG presentation directly from a USB flash drive.
Using the inherent speed of DLP® technology, Optoma Full 3D projectors can output video and images at an astonishing rate of 120Hz, allowing you to show full screen, full colour, stereoscopic 3D. The 3D effect is generated by splitting this signal into two standard video streams, one for each eye. Using DLP® Link™ technology, the 3D glasses synchronise with the image on screen to filter each stream to the correct eye. Your brain then combines the two streams to make them jump into life.
The X501 supports multiple 3D formats from various devices such as PC, Blu-ray 3D™, Sony® PS3, Microsoft® Xbox 360 or 3D TV broadcast systems.
The X501 accepts a wide variety of computer and video input signals. Connectivity includes: HDMI, DVI-D, dual VGA (Component via adaptor), S-Video, Composite, USB Reader, VGA-Out, RS232, RJ45 and +12V trigger. In addition the optional Wi-Fi accessory can be securely connected to a dedicated hidden USB port.
Five audio inputs for HDMI, PC, video and microphone sources enable the X501 to function not only as an audio switcher and volume controller, but also as a basic PA system for larger meeting rooms; thereby eliminating complicated and costly additional audio hardware and cabling.
Easy Installation with 1.6x Zoom
The X501 can project a 100” diagonal image from any distance between 2.82m to 4.59m to greatly increase your installation flexibility
DICOM simulation mode
Designed specifically for larger meeting rooms and lecture theatres, the X501 includes a special DICOMsim mode that has been specially tuned for viewing greyscale images, perfect for viewing X-rays and scans during medical training.
Clear, focused Images
DarkChip3™ from Texas Instruments, combined with Eco+ dynamic lamp technology produce a stunning 15,000:1 contrast ratio for pin sharp graphics and crystal clear text. Crisper whites, ultra-rich blacks makes images come alive and text easier to read - ideal for business and education presentations.
The X501 incorporates BrilliantColor™ technology to produce stunningly bright images with perfectly balanced, life-like colours.
System integration and control
Using the free Crestron Roomview software, multiple X501 can be monitored over LAN and also provide the user with an email message alert in case an error occurs or a lamp fails. Cut up to 30% from your energy bills using 24-hour automated power scheduling to ensure that projectors power off when not in use.
The web browser interface and full support for Extron’s IP Link, AMX dynamic device discovery and PJ-Link protocols, allow almost all aspects of the X501 to be controlled across a network, reducing installation costs and keeping you in control, wherever you are. While RS-232 connectivity ensures legacy support for existing control systems.
Easy lamp replacement
In applications requiring smooth continuous operation, minimising service time is essential. The X501 lamp can quickly be replaced without the need to remove the projector from where it is installed.
Power on both your projector and screen at the touch of a single button. For ultimate convenience, connect an Optoma electric screen directly to your X501.
The most intuitive way to present
VueMagicInstantly present from your phone or tablet using the free App: VueMagic. Available for both Android and iOS devices, VueMagic. gives you the freedom to move around the room, share ideas and connect with your audience like never before, to create a more collaborative experience for everyone.