ProSafe M7100-24X Managed Switch (XSM7224) XSM7224-100NES - C2000
[XSM7224-100NES]



Part Number: XSM7224-100NES

Manufacturer: Netgear

Condition: New

Short Description:

ProSafe M7100-24X Managed Switch (XSM7224) XSM7224-100NES

ProSafe M7100-24X Managed Switch (XSM7224) XSM7224-100NES - C2000

£4,055.00
£4,866.00 - Inc VAT




Click the Like Button below to see the latest discount:

The NETGEAR 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper "Base-T" switch solution; 24 ports 10GBase-T (RJ45) that support Fast Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server, storage and network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and other DAC connections.
M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.
Layer 2+ with static routing
- M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
- 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
- It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
- Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
- Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
- 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
- IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
- Industry standard command line interface (CLI)
- Fully functional NETGEAR web interface (GUI)

Reviews

Specs

Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 4
SFP/SFP+ slots quantity 24
Console port RS-232
Copper ethernet cabling technology 1000BASE-T,100BASE-T,10BASE-T
USB 2.0 ports quantity 1
DC-in jack Y
SFP+ module slots quantity 4
Networking
Networking standards IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1v,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Full duplex Y
Flow control support Y
Port mirroring Y
Link aggregation Y
Broadcast storm control Y
Rate limiting Y
DHCP client Y
DHCP server Y
IP routing Y
IGMP snooping Y
Spanning tree protocol Y
10G support Y
VLAN support Y
Power
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (typical) 195.2 W
Operational conditions
Operating temperature (T-T) 32 - 122 °F
Storage temperature (T-T) -20 - 70 °C
Operating relative humidity (H-H) 0 - 90%
Storage relative humidity (H-H) 0 - 95%
Non-operating altitude 0 - 10000 m
Weight & dimensions
Width 440 mm
Depth 431 mm
Height 43 mm
Weight 6.3 kg
Security
MAC address filtering Y
Access Control List (ACL) Y
SSH/SSL support Y
Packaging data
Cables included AC, RS-232
Data transmission
MAC address table 32000 entries
Supported data transfer rates 10/100/1000 Mbps
Switching capacity 480 Gbit/s
Store-and-forward Y
Number of VLANs 1024
Number of static routes 64
Maximum data transfer rate 10 Gbit/s
Jumbo frames support Y
Management features
Switch layer L2+
Switch type Managed network switch
Quality of Service (QoS) support Y
Multicast support Y
Web-based management Y
System event log Y
Protocols
Management protocols SNMP, LLDP, LLDP-MED, TFTP, SFTP, HTTP, SCP
Optical fiber
Fiber ethernet cabling technology 1000BASE‑LX,1000BASE‑SX
Other features
Power LED Y
Design
Rack mounting Y
Colour of product Grey
LED indicators Y
Cable management Y
Safety CE, CSA, UL
Electromagnetic compatibility CE, FCC, EN 55022, C-Tick, EN 50082-1, EN 55024
Performance
Stackable Y
Built-in processor Cavium CN5230-750
Processor frequency 750 MHz
Internal memory 512 MB
Memory type DDR2
Flash memory 128 MB
Firmware upgradeable Y
Mean time between failures (MTBF) 180178 h
Packaging content
Cables included AC, RS-232

Features

Netgear XSM7224. Switch type: Managed network switch, Switch layer: L2+. Console port: RS-232, Copper ethernet cabling technology: 1000BASE-T,100BASE-T,10BASE-T. Networking standards: IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1v,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE . MAC address table: 32000 entries, Switching capacity: 480 Gbit/s, Supported data transfer rates: 10/100/1000 Mbps. Fiber ethernet cabling technology: 1000BASE‑LX,1000BASE‑SX

Product Description

The NETGEAR 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper "Base-T" switch solution; 24 ports 10GBase-T (RJ45) that support Fast Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server, storage and network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and other DAC connections.
M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.
Layer 2+ with static routing
- M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
- 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
- It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
- Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
- Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
- 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
- IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
- Industry standard command line interface (CLI)
- Fully functional NETGEAR web interface (GUI)

Currently viewing: ProSafe M7100-24X Managed Switch (XSM7224) XSM7224-100NES - C2000
Categories
Customer Testimonials
Mr
Excellent service from the moment my order was raised, starting with a phone call to confirm the con ...

(read more)
By Phil Howe

milborrow chimney sweeps
Wonderful service in a time of need .. We had a breakdown of our computer and phoned the order li ...

(read more)
By kevin giddings

Miss
Fast reliable service, excellent customer service and received my order in good time. I would recome ...

(read more)
By Dawn Fearn Wood


Product as advertised and quick delivery - much appreciated

(read more)
By Don

Mrs
I have a HP2600n machine which has been brilliant , but for some reason and coincidentally the ink r ...

(read more)
By Angela McNeela

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: