TC2-MATRIXRX Vision VISION TECHCONNECT MATRIX HDMI-OVER-IP RECEIVER Converts HDMI V1.4 Signal Up To 1080P Into Packets For Transmission Over A Network. 1G. HDCP Compliant. Signal Can Flow Thr - C2000
[TC2-MATRIXRX]



Part Number: TC2-MATRIXRX

Manufacturer: vision

Condition: New

Short Description:

TC2-MATRIXRX Vision VISION TECHCONNECT MATRIX HDMI-OVER-IP RECEIVER Converts HDMI V1.4 Signal Up To 1080P Into Packets For Transmission Over A Network. 1G. HDCP Compliant. Signal Can Flow Through Up To Three Network Switches. Supports Audio Carried With HDMI Signal. No Perceptible Latency Or Compression. Comes With Matrix Setup Software. Power Supply Included. Metal Chassis With Mounting Ears. **Includes 3-year Onsite Warranty (UK Only)**

TC2-MATRIXRX Vision VISION TECHCONNECT MATRIX HDMI-OVER-IP RECEIVER Converts HDMI V1.4 Signal Up To 1080P Into Packets For Transmission Over A Network. 1G. HDCP Compliant. Signal Can Flow Thr - C2000

£1,234.00
£1,480.80 - Inc VAT




Click the Like Button below to see the latest discount:

Designed for video signage applications the Techconnect Matrix allows distribution of HDMI content over an existing managed LAN infrastructure. Because of this the cost of deployment is radically lower than bespoke AV distribution systems.
Matrix Modes
Supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing.
MJPEG Compression
It converts the video into TCP/IP packets using proprietary MPEG compression. The audio and vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network.
3rd Generation Chipset
The latest generation processing chips offer smooth, latency-free transmission without using too much valuable bandwidth on a network. Techconnect Matrix is optimised to work on a Gigabit network. Bandwidth requirement is 150Mbps @1080p 60Hz ([email protected]: 41-67Mbps).
Scaleable
Whether you need a small system or a large system; just buy what you need. Transmitters and receivers are sold separately.
RS-232
Not only can it distribute video and audio; it can also RS-232 transmit 2-way control signal to the display devices.
Cascading Network Switches
The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN and connect directly to each other. Note: used in this way the devices still need addressing during installation.
HDCP Compliant
Techconnect Matrix supports HDMI 1.3 with full HDCP compliance.
Power Over Ethernet
A power supply is included for each node, but the transmitters and receivers can also use standard Power Over Ethernet (PoE) to operate. Many network switches output PoE, or injectors can be fitted to a network to add PoE to a network.
Software Included
Vision include simple setup software to address the devices on a managed network and route content.
Control Interface
Vision offers a bridge device which connects to the same network as the transmitters and receivers and allows 3rd party control. Provides a built-in web server and Telnet API. Note: this product requires advanced networking and programming skills.

Reviews

Specs

Technical details
Type AV receiver
Maximum resolution 1920 x 1200 pixels
Maximum transfer distance 100 m
Supported video modes 1080p,720p
Bandwidth 0.15 Gbit/s
Video compression formats M-JPEG
Wireless connection N
Colour of product White
RoHS compliance Y
Certification WEEE, CE/EMC
Ports & interfaces
RJ-45 input ports 1
HDMI out 1
HDMI version 1.3
RS-232 output ports 1
DC-in jack Y
Illumination/Alarms
LED indicators Y
Indication
LED indicators Y
Weight & dimensions
Receiver dimensions (WxDxH) 115 x 26 x 141 mm
Receiver weight 440 g
Packaging data
Package dimensions (WxDxH) 140 x 65 x 265 mm
Package weight 820 g
Operational conditions
Operating temperature (T-T) -5 - 35 °C
Relative humidity 5 - 90%
Operating relative humidity (H-H) 5 - 90%
Power
AC input voltage 100-240 V
AC input frequency 50/60 Hz
Power consumption (typical) 5 W
Operating voltage 12 V
Current 2 A

Related Products

Refurbished Printers

Features

Vision TC2-MATRIXRX. AC input voltage: 100-240 V, AC input frequency: 50/60 Hz, Operating voltage: 12 V. Receiver dimensions (WxDxH): 115 x 26 x 141 mm, Receiver weight: 440 g. Package dimensions (WxDxH): 140 x 65 x 265 mm, Package weight: 820 g

Product Description

Designed for video signage applications the Techconnect Matrix allows distribution of HDMI content over an existing managed LAN infrastructure. Because of this the cost of deployment is radically lower than bespoke AV distribution systems.
Matrix Modes
Supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing.
MJPEG Compression
It converts the video into TCP/IP packets using proprietary MPEG compression. The audio and vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network.
3rd Generation Chipset
The latest generation processing chips offer smooth, latency-free transmission without using too much valuable bandwidth on a network. Techconnect Matrix is optimised to work on a Gigabit network. Bandwidth requirement is 150Mbps @1080p 60Hz ([email protected]: 41-67Mbps).
Scaleable
Whether you need a small system or a large system; just buy what you need. Transmitters and receivers are sold separately.
RS-232
Not only can it distribute video and audio; it can also RS-232 transmit 2-way control signal to the display devices.
Cascading Network Switches
The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN and connect directly to each other. Note: used in this way the devices still need addressing during installation.
HDCP Compliant
Techconnect Matrix supports HDMI 1.3 with full HDCP compliance.
Power Over Ethernet
A power supply is included for each node, but the transmitters and receivers can also use standard Power Over Ethernet (PoE) to operate. Many network switches output PoE, or injectors can be fitted to a network to add PoE to a network.
Software Included
Vision include simple setup software to address the devices on a managed network and route content.
Control Interface
Vision offers a bridge device which connects to the same network as the transmitters and receivers and allows 3rd party control. Provides a built-in web server and Telnet API. Note: this product requires advanced networking and programming skills.

Currently viewing: TC2-MATRIXRX Vision VISION TECHCONNECT MATRIX HDMI-OVER-IP RECEIVER Converts HDM
Categories
Customer Testimonials
HP 19" Monitor Ex-Demo A1 condition
On monday evening I ordered this monitor having found Athema through a price comparison website, I w ...

(read more)
By Ellen K

Mr
As a first time user of this website I was very impressed with the ease of use. The printer I purcha ...

(read more)
By Tony Rice

Mr
I bought an ex-demo laser printer from Athema Services at a fraction of the new cost. The product is ...

(read more)
By David Charity

Mr
We had spent a couple of days looking for a specific HP printer for our business @ https://www.carle ...

(read more)
By Paulo Larkman

Miss
Good value and fairly quick delivery of a Brother printer. Very quick, polite response when I chased ...

(read more)
By Stock

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: