Veracity HIGHWIRE POWERSTAR Base unit VHW-HWPS-B - eet01
[VHW-HWPS-B]



Part Number: VHW-HWPS-B

Manufacturer: Veracity

Condition: New

Short Description:

Veracity HIGHWIRE POWERSTAR Base unit VHW-HWPS-B

Veracity HIGHWIRE POWERSTAR Base unit VHW-HWPS-B - eet01

£206.00
£247.20 - Inc VAT




Click the Like Button below to see the latest discount:

Fast Ethernet and POE power over coax video cable
HIGHWIRE POWERSTAR lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.
Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years.
And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies.
Simply add power
With no configuration or measurement required, installation of HIGHWIRE PowerStar is as straightforward as plugging it in.
Two models are used, as shown in the diagram below. The BASE unit receives POE power and transmits it down the coax. The CAMERA unit receives power from the coax and delivers up to full POE Plus power to the IP camera.
If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.
Installer friendly
For fast installation and guaranteed performance, HIGHWIRE POWERSTAR features Veracity's unique SafeView display.
SafeView provides an instant and easy-to-understand confirmation of network and power status right across the cable, with no need to access remote equipment to check connections.
Meanwhile, safe and compliant detection of POE equipment and POE over coax compatibility ensures correct operation, with no risk of damage to non-POE or legacy analog equipment.
Reliability assured
Because the length and quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.
However, thanks to HIGHWIRE POWERSTAR's ultra low-power design and efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation. And once connected, the SafeView power display instantly reaffirms that the actual power available to the camera is sufficient.
For predictable network performance, HIGHWIRE's proven technology delivers full network bandwidth, right to the limits of range. And secure screw-terminal DC connections, or the option of using a UPS-backed POE source, provide the last link in assuring continuous power delivery.

Reviews

Specs

Networking
Data transfer rate (max) 100 Mbit/s
Networking standards IEEE 802.3af,IEEE 802.3at
Ethernet LAN data rates 100 Mbit/s
Auto-negotiation Y
Duplex system Full
Converter input interface 100Base-T
Weight & dimensions
Width 54 mm
Depth 103 mm
Height 25 mm
Weight 50 g
Package width 75 mm
Package depth 130 mm
Package height 32 mm
Package weight 70 g
Ports & interfaces
Connectivity technology Wired
Ethernet LAN (RJ-45) ports 1
BNC ports quantity 1
Power
Input voltage 40 - 57
Input current 0.7
Power consumption (typical) 1.5 W
Power consumption (max) 25 W
Power over Ethernet (PoE) Y
Operational conditions
Operating temperature (T-T) -10 - 50 °C
Storage relative humidity (H-H) 0 - 85%
Certificates
RoHS compliance Y
Certification FCC, CE, RoHS
Packaging content
Manual Y
Quick installation guide Y
Design
Internal Y
LED indicators Y
Colour of product Blue
Performance
Maximum transfer distance 500 m

Related Products

Refurbished Printers

Features

Veracity VHW-HWPS-B. Data transfer rate (max): 100 Mbit/s, Converter input interface: 100Base-T, Networking standards: IEEE 802.3af,IEEE 802.3at. Connectivity technology: Wired. Maximum transfer distance: 500 m. Colour of product: Blue. Input voltage: 40 - 57, Power consumption (typical): 1.5 W, Power consumption (max): 25 W

Product Description

Fast Ethernet and POE power over coax video cable
HIGHWIRE POWERSTAR lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable.
Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years.
And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies.
Simply add power
With no configuration or measurement required, installation of HIGHWIRE PowerStar is as straightforward as plugging it in.
Two models are used, as shown in the diagram below. The BASE unit receives POE power and transmits it down the coax. The CAMERA unit receives power from the coax and delivers up to full POE Plus power to the IP camera.
If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.
Installer friendly
For fast installation and guaranteed performance, HIGHWIRE POWERSTAR features Veracity's unique SafeView display.
SafeView provides an instant and easy-to-understand confirmation of network and power status right across the cable, with no need to access remote equipment to check connections.
Meanwhile, safe and compliant detection of POE equipment and POE over coax compatibility ensures correct operation, with no risk of damage to non-POE or legacy analog equipment.
Reliability assured
Because the length and quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.
However, thanks to HIGHWIRE POWERSTAR's ultra low-power design and efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation. And once connected, the SafeView power display instantly reaffirms that the actual power available to the camera is sufficient.
For predictable network performance, HIGHWIRE's proven technology delivers full network bandwidth, right to the limits of range. And secure screw-terminal DC connections, or the option of using a UPS-backed POE source, provide the last link in assuring continuous power delivery.

Currently viewing: Veracity HIGHWIRE POWERSTAR Base unit VHW-HWPS-B - eet01
Categories
Customer Testimonials
Mr
They were extremely helpful in helping us select a refurbished printer that would suit our needs, an ...

(read more)
By Novaes

Mr
Wonderful service good to deal with. Goods ordered one day, received well packaged the next day. J ...

(read more)
By Norman Baynham

Miss
Nice easy people to deal with and a good product - prompt responses even after the sale was complete ...

(read more)
By Sue Hockaday

best services
best service ever. fast shipment and quick customer service respond. like +++++ A++++++ reccomended

(read more)
By David Teoh

HP C3Z94AA#ABU HP Pavilion 23xi 23in UPS Monitor
Great product, great service and a very nice chap. Highly recommended.

(read more)
By Malcolm Mckenzie

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: