Veracity POINTSOURCE Portable POE injector, VAD-PS - eet01
[VAD-PS]

TEMPORARILY OUT OF STOCK


Part Number: VAD-PS

Manufacturer: Veracity

Condition: New

Short Description:

Veracity POINTSOURCE Portable POE injector, VAD-PS

Veracity POINTSOURCE Portable POE injector, VAD-PS - eet01

£173.00
£207.60 - Inc VAT




PLEASE TYPE IN THE PART NUMBER IN THE SEARCH BOX
Click the Like Button below to see the latest discount:

Portable POE Injector Battery Pack for IP Cameras
Veracity's POINTSOURCE is a rechargeable battery-powered Power over Ethernet (POE) injector, especially designed to enable security installers to install, setup, test or demonstrate IP cameras in an installation, even if no network or power connection is available.
POINTSOURCE features PINPOINT-style integrated network crossover, to allow direct connection of a laptop. It supports all classes of 802.3af POE device, and also includes a 12 volt power output for auxilliary equipment.
- Allows local viewing of IP camera images on laptop/netbook close to camera
- Enables rapid and precise adjustment of lens focus and viewing angle
- Includes a 12 volt power output for auxiliary equipment
- Battery capacity sufficient for typical full day’s installation work
- POINTSOURCE supports all classes of 802.3af POE device
- Installs in seconds – removes in seconds - reduces time on site
Portable, rechargeable, power where you need it
Veracity’s POINTSOURCE is a portable, rechargeable battery - powered POE (Power over Ethernet) injector. It is designed for field use, being compact and easy to handle, with a useful shoulder strap, which leaves your hands free. It can deliver enough power to support a full day’s IP camera installation work. POINTSOURCE provides a similar functionality to Veracity’s PINPOINT, but includes a built-in POE power source to allow installation and set-up of IP cameras before POE power is available through the network. POINTSOURCE can be used with all IEEE 802.3af POE compatible equipment, including IP cameras, Wireless Access Points, VOIP phones and POE-powered Access Control devices.
On Site configuration
The primary application for POINTSOURCE is the in-situ configuration, set-up and fine adjustment of IP cameras on an installation site. By connecting a laptop or netbook to the IP camera through POINTSOURCE, all aspects of the camera image (focus, direction, aperture, zoom, resolution, compression etc.) can easily be viewed or adjusted.
Site surveys and pre-installation trials
POINTSOURCE allows the rapid set-up of an IP camera during site-surveys, allowing the integrator to capture snapshots or video clips of the actual on-site scenes for presentation to the prospective end-user. This is an effective example of when a “picture paints a thousand words”.
Customer demonstrations can be done anywhere
Any new IP camera can very quickly be demonstrated to a client or consultant using just the camera, a laptop and the POINTSOURCE package. No external power or additional cabling is required, allowing demonstrations to be done anywhere, from a café tabletop to a desert road.
Mobile and temporary installations
A POINTSOURCE and IP camera with SD-card slot are all that’s required for a very compact and easily transported temporary surveillance recording system.

Reviews

Specs

Ports & interfaces
Ethernet LAN (RJ-45) ports 1
Networking
Ethernet LAN data rates 10,100 Mbit/s
Power over Ethernet (PoE) Yes
Duplex system Full, Half
Weight & dimensions
Dimensions (WxDxH) 120 x 190 x 90 mm
Weight 1.7 kg
Power
Power over Ethernet (PoE) 48 V
Output power 15.4 W
Output current 1.5 A
Total Power over Ethernet (PoE) budget 15.4 W
Operational conditions
Operating temperature (T-T) -4 - 113 °F
Operating relative humidity (H-H) 0 - 85%
Features
Colour of product Blue
LED indicators PoE, Power
Networking standards IEEE 802.3af, IEEE 802.3at
Certification RohS, Battery Directive compliant. CE, FCC, REACh exempt \nIATA non-restricted (OK to transport by air)

Related Products

Refurbished Printers

Features

Veracity VAD-PS. Ethernet LAN data rates: 10,100 Mbit/s, Duplex system: Full, Half. Colour of product: Blue, LED indicators: PoE, Power, Networking standards: IEEE 802.3af, IEEE 802.3at. Power over Ethernet (PoE): 48 V, Output power: 15.4 W, Output current: 1.5 A. Dimensions (WxDxH): 120 x 190 x 90 mm, Weight: 1.7 kg

Product Description

Portable POE Injector Battery Pack for IP Cameras
Veracity's POINTSOURCE is a rechargeable battery-powered Power over Ethernet (POE) injector, especially designed to enable security installers to install, setup, test or demonstrate IP cameras in an installation, even if no network or power connection is available.
POINTSOURCE features PINPOINT-style integrated network crossover, to allow direct connection of a laptop. It supports all classes of 802.3af POE device, and also includes a 12 volt power output for auxilliary equipment.
- Allows local viewing of IP camera images on laptop/netbook close to camera
- Enables rapid and precise adjustment of lens focus and viewing angle
- Includes a 12 volt power output for auxiliary equipment
- Battery capacity sufficient for typical full day’s installation work
- POINTSOURCE supports all classes of 802.3af POE device
- Installs in seconds – removes in seconds - reduces time on site
Portable, rechargeable, power where you need it
Veracity’s POINTSOURCE is a portable, rechargeable battery - powered POE (Power over Ethernet) injector. It is designed for field use, being compact and easy to handle, with a useful shoulder strap, which leaves your hands free. It can deliver enough power to support a full day’s IP camera installation work. POINTSOURCE provides a similar functionality to Veracity’s PINPOINT, but includes a built-in POE power source to allow installation and set-up of IP cameras before POE power is available through the network. POINTSOURCE can be used with all IEEE 802.3af POE compatible equipment, including IP cameras, Wireless Access Points, VOIP phones and POE-powered Access Control devices.
On Site configuration
The primary application for POINTSOURCE is the in-situ configuration, set-up and fine adjustment of IP cameras on an installation site. By connecting a laptop or netbook to the IP camera through POINTSOURCE, all aspects of the camera image (focus, direction, aperture, zoom, resolution, compression etc.) can easily be viewed or adjusted.
Site surveys and pre-installation trials
POINTSOURCE allows the rapid set-up of an IP camera during site-surveys, allowing the integrator to capture snapshots or video clips of the actual on-site scenes for presentation to the prospective end-user. This is an effective example of when a “picture paints a thousand words”.
Customer demonstrations can be done anywhere
Any new IP camera can very quickly be demonstrated to a client or consultant using just the camera, a laptop and the POINTSOURCE package. No external power or additional cabling is required, allowing demonstrations to be done anywhere, from a café tabletop to a desert road.
Mobile and temporary installations
A POINTSOURCE and IP camera with SD-card slot are all that’s required for a very compact and easily transported temporary surveillance recording system.

Currently viewing: Veracity POINTSOURCE Portable POE injector, VAD-PS - eet01
Categories
Customer Testimonials
Mr
I order a HP laser printer and it arrived less than 24 hours later. Unfortunately there was a small ...

(read more)
By Joe Gass

Mr
Stunningly excellent service! I ordered a Samsung laser printer late on Friday afternoon, after find ...

(read more)
By Kevin Johnson


Excellent service. A new unit failed to work in my printer, but I was given very good support and th ...

(read more)
By Richard Payne


The refurbished HP LaserJet 1012 arrived in good condition and is performing well. What would have ...

(read more)
By Ray Ravenscroft

Mr
I purchased a printer from this company recently. From ordering the product to plugging in and using ...

(read more)
By David Cotterell

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: