VISION TECHCONNECT CONTROL3 PROJECTOR CONTROLLER Learns IR Remote Control Codes From Original Device Remote - One Code Per Button. Or For Advanced Applications It Can Be Connected To A PC Via - C2000
[TC2-CTL3]

TEMPORARILY OUT OF STOCK


Part Number: TC2-CTL3

Manufacturer: vision

Condition: New

Short Description:

VISION TECHCONNECT CONTROL3 PROJECTOR CONTROLLER Learns IR Remote Control Codes From Original Device Remote - One Code Per Button. Or For Advanced Applications It Can Be Connected To A PC Via USB And Programmed With IR, RS-232, And 12v Trigger Commands. Commands Can Be Scheduled. Multiple Commands Can Be Allocated To Each Button. Setup Can Be Easily Duplicated To Multiple Devices. Button Labels Can Be Changed Easily From The Front. Comes With 1 X IR Emitter With 20m Cable, 1 X IR Emitter With 20 TC2-CTL3

VISION TECHCONNECT CONTROL3 PROJECTOR CONTROLLER Learns IR Remote Control Codes From Original Device Remote - One Code Per Button. Or For Advanced Applications It Can Be Connected To A PC Via - C2000

£114.00
£136.80 - Inc VAT




PLEASE TYPE IN THE PART NUMBER IN THE SEARCH BOX
Click the Like Button below to see the latest discount:

The Techconnect Control3 is the most flexible professional AV control device available. A simple control panel controls everything and only presents users with the functions they use every day. No tech support calls. No losing remote controls. All in a secure Techconnect module.
Simple Mode
Hold down the two middle buttons to put Control3 into learn mode, point the original device remote at the front of the Control3, and program one code per button. “Off” is pre-set to send the code twice for projectors, and the bottom buttons send codes repeatedly when held down.
Advanced Mode
Connect to a PC and use included software to allocate multiple RS-232, IR, and 12v triggers to each button. Commands for each button can be sent simultaneously, sequentially, or repeatedly if you hold the button down.
Labels
Clear caps unclip off the buttons from the front to allow label changes. A set of printed labels are included, and users can print their own as necessary.
Backlit buttons
Backlit buttons are easy to read. If any buttons are not used blank buttons are included which block the backlight.
Scheduling
Once programmed, a schedule can be setup.
Delay
Commands can be delayed up to 60 seconds. For example when you turn a projector on it takes time to warm up so the motorised screen doesn’t come down until the projector is ready.
Duplication
Programs can be saved to a PC making duplication for a roll out simple.
Need More Buttons?
If more than six buttons are required the software allows you to add another Control3 as an extension keypad which connects to the master via RS485. All commands are still held and sent by the master Control3.
Code Library
An integrated library of IR and RS-232 codes speed programming up. IR codes can be added by using the original remote, or by copying and pasting the hex code if you have lost the remote.
Battery
The Control3 comes with a mains power adaptor, but can also be powered by 2 x AAA batteries (not included). A switch under the batteries selects the power source. Note: when running on battery backlights do not stay lit and 12v triggers will not be sent.
IR
The IR receiver for learning codes is on the front panel, and is accompanied by an IR emitter which eliminates the need to run an IR cable in smaller rooms. Two external IR emitters are included; one with a 10m cable, and one with a 200mm cable.
RS-232 and 485
These two protocols use the same codes but RS-485 only requires two cables and can be run a longer distance. Note: a projector with an RS-232 port will not be able to decode RS-485 signal.
12v Trigger
Many projector screens can be controlled with a 12v trigger voltage. Note: Many projection screens with remote controls use RF which cannot be learned or sent by the Control.

Reviews

Specs

Weight & dimensions
Width 4.2 cm
Depth 3.1 cm
Height 7.1 cm
Weight 63 g
Package dimensions (WxDxH) 150 x 63 x 180 mm
Package weight 500 g
Display
Built-in display Yes
Certificates
RoHS compliance Yes
Certification WEEE & CE
Other features
Power requirements 100-240VAC, 50/60Hz
Buttons
Input type Press buttons
Buttons quantity 6
Backlight buttons Yes
Battery
Rechargeable No
Battery type AAA
Number of batteries supported 2
Performance
Number of devices supported 1
Design
Colour of product White
Remote control proper use Projector
Material Plastic

Related Products

Refurbished Printers

Features

Vision Snapshot. Colour of product: White, Remote control proper use: Projector, Material: Plastic. Input type: Press buttons. Battery type: AAA. Width: 4.2 cm, Depth: 3.1 cm, Height: 7.1 cm. Certification: WEEE & CE

Product Description

The Techconnect Control3 is the most flexible professional AV control device available. A simple control panel controls everything and only presents users with the functions they use every day. No tech support calls. No losing remote controls. All in a secure Techconnect module.
Simple Mode
Hold down the two middle buttons to put Control3 into learn mode, point the original device remote at the front of the Control3, and program one code per button. “Off” is pre-set to send the code twice for projectors, and the bottom buttons send codes repeatedly when held down.
Advanced Mode
Connect to a PC and use included software to allocate multiple RS-232, IR, and 12v triggers to each button. Commands for each button can be sent simultaneously, sequentially, or repeatedly if you hold the button down.
Labels
Clear caps unclip off the buttons from the front to allow label changes. A set of printed labels are included, and users can print their own as necessary.
Backlit buttons
Backlit buttons are easy to read. If any buttons are not used blank buttons are included which block the backlight.
Scheduling
Once programmed, a schedule can be setup.
Delay
Commands can be delayed up to 60 seconds. For example when you turn a projector on it takes time to warm up so the motorised screen doesn’t come down until the projector is ready.
Duplication
Programs can be saved to a PC making duplication for a roll out simple.
Need More Buttons?
If more than six buttons are required the software allows you to add another Control3 as an extension keypad which connects to the master via RS485. All commands are still held and sent by the master Control3.
Code Library
An integrated library of IR and RS-232 codes speed programming up. IR codes can be added by using the original remote, or by copying and pasting the hex code if you have lost the remote.
Battery
The Control3 comes with a mains power adaptor, but can also be powered by 2 x AAA batteries (not included). A switch under the batteries selects the power source. Note: when running on battery backlights do not stay lit and 12v triggers will not be sent.
IR
The IR receiver for learning codes is on the front panel, and is accompanied by an IR emitter which eliminates the need to run an IR cable in smaller rooms. Two external IR emitters are included; one with a 10m cable, and one with a 200mm cable.
RS-232 and 485
These two protocols use the same codes but RS-485 only requires two cables and can be run a longer distance. Note: a projector with an RS-232 port will not be able to decode RS-485 signal.
12v Trigger
Many projector screens can be controlled with a 12v trigger voltage. Note: Many projection screens with remote controls use RF which cannot be learned or sent by the Control.

Currently viewing: VISION TECHCONNECT CONTROL3 PROJECTOR CONTROLLER Learns IR Remote Control Codes
Categories
Customer Testimonials
Mr
My search for an affordable pro lap top led me to ATHEMA Services.. ... WHAT LUCK.. They had exact ...

(read more)
By Darwin


First class service for a first time user of your website. Many thanks for a very user friendly and ...

(read more)
By Nigel Martin


I found Athema services of a high standard. Communication was great and our printer that we bought w ...

(read more)
By Darren Chmiel


We bought a printer off Athema at gone 4pm and it was still delivered before 10am the next day, exce ...

(read more)
By Dominic Adshead

Mr
The HP laserjet 1320nw supplied looks in good condition and works fine. It came with a 45% full cart ...

(read more)
By Martyn Brown

Write a Testimonial
View All Testimonials
Mailing List:
Sign up for our latest offers and promos:
E-mail address: