Stock Status: 1x unit in stock
The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM Extenders, Switches and Splitters. It can also be used in place of a monitor to keep the graphics card of a PC or Server awake for remote access via IP. With support for resolutions up to Ultra HD 4K 60Hz (via cloning) including High-Dynamic Range and with the ability to passthrough HDCP 2.2 content, the Emulator is suitable for use with the very latest PC and AV applications.
Some computer systems, KVM switches and digital video signage systems may interrupt the flow of EDID data, or may not be able to pass this information directly back to the video card's output port. This adapter can be used to quickly and easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds!
It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
Specs
| Ports & interfaces |
| Connector 1 |
HDMI |
| Connector 2 |
HDMI |
| Connector 1 gender |
Male |
| Connector 2 gender |
Female |
| Packaging data |
| Package width |
136 mm |
| Package height |
138 mm |
| Package weight |
13 g |
| Package type |
Polybag |
| Weight & dimensions |
| Weight |
8 g |
| Operational conditions |
| Operating temperature (T-T) |
0 - 60 °C |
| Storage temperature (T-T) |
-10 - 70 °C |
| Relative humidity |
0 - 80% |
| Packaging content |
| Quantity per pack |
1 pc(s) |
| Performance |
| Product colour |
Black |
| Supported video modes |
720p |
| Data transfer rate |
18 Gbit/s |
| Maximum resolution |
3840 x 2160 pixels |
| Maximum refresh rate |
75 Hz |
| Colour depth |
24 bit |
| Plug and Play |
Yes |
| Certification |
| Compliance certificates |
RoHS |
| Certification |
CE, FCC, REACH |
Features
Lindy HDMI 2.0 EDID Emulator. Connector 1: HDMI, Connector 2: HDMI. Product colour: Black
Product Description
The Lindy HDMI 2.0 EDID Emulator Adapter is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM Extenders, Switches and Splitters. It can also be used in place of a monitor to keep the graphics card of a PC or Server awake for remote access via IP. With support for resolutions up to Ultra HD 4K 60Hz (via cloning) including High-Dynamic Range and with the ability to passthrough HDCP 2.2 content, the Emulator is suitable for use with the very latest PC and AV applications.
Some computer systems, KVM switches and digital video signage systems may interrupt the flow of EDID data, or may not be able to pass this information directly back to the video card's output port. This adapter can be used to quickly and easily clone the EDID data from a HDMI display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds!
It is also possible to use the Emulator without cloning a display as it comes complete with preset EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.
