Stock Status: 1x unit in stock
Connector A: UK Mains Plug_x000D_
Connector B: IEC C13_x000D_
5A fused_x000D_
Cable type: H05-VVF 3G*0.75mm²_x000D_
Colour: Black_x000D_
10 years warranty_x000D_
_x000D_
These LINDY power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) – but you can also use them in private sections._x000D_
_x000D_
Due to the high temperature resistance from -10 to 70°C during operation, these cables can also be used in non air-conditioned areas._x000D_
_x000D_
Note: Cables with IEC C13 sockets such as this are sometimes known by the generic term 'kettle lead'. Even though this term is commonly used, technically it is incorrect as a kettle requires special IEC C15/16 connectors rated at 120 degrees. So, although they look similar, a 'real' kettle lead features a connector with a cut out on the top. Standard IEC C13 cables cannot be plugged into kettles!_x000D_
_x000D_
Specs
| Features |
| Cable length |
2 m |
| Connector 1 |
BS 1363 |
| Connector 2 |
C13 coupler |
| Connector 1 gender |
Male |
| Connector 2 gender |
Female |
| Connector 1 form factor |
Angled |
| Connector 2 form factor |
Straight |
| Connector angle |
90° |
| Product colour |
Black |
Features
Lindy 2m UK to IEC C13 Mains Cable. Cable length: 2 m, Connector 1: BS 1363, Connector 2: C13 coupler
Product Description
Connector A: UK Mains Plug_x000D_
Connector B: IEC C13_x000D_
5A fused_x000D_
Cable type: H05-VVF 3G*0.75mm²_x000D_
Colour: Black_x000D_
10 years warranty_x000D_
_x000D_
These LINDY power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) – but you can also use them in private sections._x000D_
_x000D_
Due to the high temperature resistance from -10 to 70°C during operation, these cables can also be used in non air-conditioned areas._x000D_
_x000D_
Note: Cables with IEC C13 sockets such as this are sometimes known by the generic term 'kettle lead'. Even though this term is commonly used, technically it is incorrect as a kettle requires special IEC C15/16 connectors rated at 120 degrees. So, although they look similar, a 'real' kettle lead features a connector with a cut out on the top. Standard IEC C13 cables cannot be plugged into kettles!_x000D_
_x000D_
