Stock Status: 1x unit in stock
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Automatic Voltage Regulation (AVR)
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Specs
| Weight & dimensions |
| Width |
160 mm |
| Depth |
305 mm |
| Height |
92 mm |
| Weight |
5.7 kg |
| Operational conditions |
| Operating temperature (T-T) |
0 - 40 °C |
| Operating relative humidity (H-H) |
0 - 90% |
| Ports & interfaces |
| AC outlet types |
C13 coupler |
| AC outlets quantity |
1 AC outlet(s) |
| Other features |
| Battery type |
leakproof |
| Output voltage |
230 V |
| Battery |
| Battery capacity |
9 VAh |
| Battery life (max) |
5 year(s) |
| Battery recharge time |
8 h |
| Design |
| Product colour |
Black |
| Cable length |
1.52 m |
| Features |
| UPS topology |
Line-Interactive |
| Output power capacity |
1 kVA |
| Output power |
600 W |
| Waveform |
Sine |
| Input operation voltage (min) |
170 V |
| Input operation voltage (max) |
280 V |
| Input frequency |
50/60 Hz |
| Output operation voltage (min) |
0 V |
| Output operation voltage (max) |
0 V |
| Output frequency |
50/60 Hz |
| Output frequency regulation |
50/60 Hz |
| Output voltage regulation |
10% |
| Automatic Voltage Regulation (AVR) |
Yes |
| Surge energy rating |
156 J |
| Transfer time (Line Mode to Battery Mode) |
6 ms |
| Noise level |
40 dB |
| Surge protection |
Yes |
| Audible alarm(s) |
Yes |
| Audible alarm modes |
Low battery alarm, Overload alarm |
| Logistics data |
| Harmonized System (HS) code |
85078000 |
| Packaging data |
| Package width |
143 mm |
| Package depth |
373 mm |
| Package height |
237 mm |
| Package weight |
6 kg |
| Certification |
| Compliance certificates |
RoHS |
| Certification |
CE |
| Packaging content |
| Manual |
Yes |
Features
APC BV1000I. UPS topology: Line-Interactive, Output power capacity: 1 kVA, Output power: 600 W. AC outlet types: C13 coupler, AC outlets quantity: 1 AC outlet(s). Battery capacity: 9 VAh, Battery life (max): 5 year(s), Battery recharge time: 8 h. Product colour: Black, Cable length: 1.52 m. Compliance certificates: RoHS, Certification: CE
Product Description
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Automatic Voltage Regulation (AVR)
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
