Click the Follow Button below to see the latest discount:
Specific features:
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Audible alarms: Provide notification of changing flywheel conditions
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
LCD display: Alpha-Numeric Display which displays system parameters and alarms.
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable: Provides temporary battery power when the utility power is out.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms: Provides notification of changing utility power and UPS conditions.
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivity: Provides management of the UPS via a USB port (not available on all models).
Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery
Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
Adjustable voltage sensitivity: Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Battery fault detection: Monitors room and individual battery temperature changes for early detection of thermal runaway, shorted cells, open circuit, and bad battery.
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Audible alarms: Provides notification of changing utility power and UPS conditions.
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools: Allows quick, easy battery replacement.
LED status indicators: Quickly understand unit and power status with visual indicators.
Cold-start capable: Provides temporary battery power when the utility power is out.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Resettable circuit breakers: Enables a quick recovery from overload events.
Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Intelligent battery management: Micro-processor controlled battery charging and diagnostic testing ensures maximum battery life.
Specs
| Weight & dimensions |
| Width |
112 mm |
| Depth |
380 mm |
| Height |
301 mm |
| Weight |
11.6 kg |
| Package weight |
13.2 kg |
| Operational conditions |
| Operating temperature (T-T) |
0 - 40 °C |
| Storage temperature (T-T) |
-15 - 45 °C |
| Operating relative humidity (H-H) |
0 - 95% |
| Storage relative humidity (H-H) |
0 - 95% |
| Operating altitude |
0 - 9000 m |
| Non-operating altitude |
0 - 15000 m |
| Ports & interfaces |
| Modem (RJ-11) ports |
1 |
| Ethernet LAN (RJ-45) ports |
1 |
| Other features |
| Battery type |
APCRBC124 |
| Interface |
USB |
| Input connection type |
IEC-320 C14 |
| Nominal output voltage |
230 V |
| Filtering description |
UL 1449 |
| Nominal input voltage |
230 V |
| Operating temperature (T-T) |
32 - 104 °F |
| Package dimensions (WxDxH) |
238 x 488 x 387 mm |
| Battery |
| Battery technology |
Sealed Lead Acid (VRLA) |
| Battery recharge time |
8 h |
| Replacement battery cartridge |
1 |
| Design |
| Product colour |
Black |
| Cable length |
1.83 m |
| Features |
| Output power capacity |
1.2 kVA |
| Output power |
865 W |
| Surge energy rating |
445 J |
| Logistics data |
| Harmonized System (HS) code |
85078000 |
Features
APC Power Saving Back-UPS RS 1500 230V CEE 7/5. Output power capacity: 1.2 kVA, Output power: 865 W, Surge energy rating: 445 J. Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 8 h. Product colour: Black, Cable length: 1.83 m. Width: 112 mm, Depth: 380 mm, Height: 301 mm. Battery type: APCRBC124, Interface: USB, Input connection type: IEC-320 C14
Product Description
Specific features:
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Audible alarms: Provide notification of changing flywheel conditions
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
LCD display: Alpha-Numeric Display which displays system parameters and alarms.
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable: Provides temporary battery power when the utility power is out.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms: Provides notification of changing utility power and UPS conditions.
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivity: Provides management of the UPS via a USB port (not available on all models).
Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery
Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
Adjustable voltage sensitivity: Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Battery fault detection: Monitors room and individual battery temperature changes for early detection of thermal runaway, shorted cells, open circuit, and bad battery.
Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Audible alarms: Provides notification of changing utility power and UPS conditions.
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools: Allows quick, easy battery replacement.
LED status indicators: Quickly understand unit and power status with visual indicators.
Cold-start capable: Provides temporary battery power when the utility power is out.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Resettable circuit breakers: Enables a quick recovery from overload events.
Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Intelligent battery management: Micro-processor controlled battery charging and diagnostic testing ensures maximum battery life.
