Click the Follow Button below to see the latest discount:
Gigabit Fiber Edge Switch
The Allied Telesis x220-28GS is a fully managed high-performing Gigabit Layer 3 switch. The combination of 24 x 100/1000X SFP slots, and 4 x 100/1000X SFP uplinks make it ideal for sensitive data transfer and long-distance fiber connectivity at the edge of the network.
Specs
Ports & interfaces |
Installed SFP modules quantity |
28 |
Console port |
RJ-45 |
USB 2.0 ports quantity |
1 |
Power connector |
DC-in jack |
Networking |
Networking standards |
IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
10G support |
No |
Port mirroring |
Yes |
Full duplex |
Yes |
IP routing |
Yes |
Flow control support |
Yes |
Link aggregation |
Yes |
Broadcast storm control |
Yes |
Spanning tree protocol |
Yes |
VLAN support |
Yes |
Virtual LAN features |
Multicast VLAN, Private VLAN, Voice VLAN, Policy-based VLAN, Port-based VLAN |
Number of VLANs |
4094 |
Power |
AC input voltage |
100 - 240 V |
AC input frequency |
50 - 60 Hz |
Input current |
0.6 A |
Power consumption (max) |
75 W |
Operational conditions |
Operating temperature (T-T) |
0 - 50 °C |
Storage temperature (T-T) |
-25 - 70 °C |
Operating relative humidity (H-H) |
5 - 90% |
Storage relative humidity (H-H) |
5 - 95% |
Operating altitude |
0 - 3048 m |
Heat dissipation |
256 BTU/h |
Weight & dimensions |
Width |
440 mm |
Depth |
324 mm |
Height |
44 mm |
Weight |
4.3 kg |
Security |
DHCP features |
DHCP snooping, DHCP client |
Access Control List (ACL) |
Yes |
IGMP snooping |
Yes |
Security algorithms |
128-bit AES, 192-bit AES, 256-bit AES, DES, MD5, SHA-1, SHA-2, SHA-256, SNMP, SSH, SSH-2, SSL/TLS |
MAC address filtering |
Yes |
SSH/SSL support |
Yes |
Loop protection |
Yes |
BPDU filtering/protection |
Yes |
Authentication |
MAC-based authentication, Port-based authentication, Web-based authentication |
Root protection |
Yes |
Password protection |
Yes |
DoS attack prevention |
Yes |
Authentication type |
IEEE 802.1x |
Packaging data |
Rack mount kit |
Yes |
Package width |
570 mm |
Package depth |
430 mm |
Package height |
150 mm |
Package weight |
6.3 kg |
Data transmission |
MAC address table |
16000 entries |
Switching capacity |
56 Gbit/s |
Forwarding rate |
41.7 Mpps |
Latency (10-100 Mbps) |
6.9 µs |
Latency (1 Gbps) |
3.7 µs |
Static route |
Yes |
Jumbo frames support |
Yes |
Packet buffer memory |
1.5 MB |
Management features |
Switch type |
Managed |
Switch layer |
L3 |
Quality of Service (QoS) support |
Yes |
Web-based management |
Yes |
MIB support |
Y |
Protocols |
Management protocols |
SNMP |
Routing protocols |
IP, RIP |
IPv4 & IPv6 features |
IPv6 Telnet |
Power over Ethernet (PoE) |
Power over Ethernet (PoE) |
No |
Design |
Rack mounting |
Yes |
Form factor |
1U |
Product colour |
Grey |
LED indicators |
Yes |
Performance |
Memory type |
DDR-SDRAM |
Internal memory |
512 MB |
Flash memory |
128 MB |
Noise level |
45 dB |
Plug and Play |
Yes |
Telnet |
Yes |
sFlow |
Yes |
Multicast features |
Multicast support |
Yes |
Features
Allied Telesis x220-28GS. Switch type: Managed, Switch layer: L3. Installed SFP modules quantity: 28, USB 2.0 ports quantity: 1, Console port: RJ-45. Full duplex. MAC address table: 16000 entries, Switching capacity: 56 Gbit/s. Networking standards: IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z. Power connector: DC-in jack. Rack mounting, Form factor: 1U
Product Description
Gigabit Fiber Edge Switch
The Allied Telesis x220-28GS is a fully managed high-performing Gigabit Layer 3 switch. The combination of 24 x 100/1000X SFP slots, and 4 x 100/1000X SFP uplinks make it ideal for sensitive data transfer and long-distance fiber connectivity at the edge of the network.