Stock Status: 1x unit in stock
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
Specs
| Illumination/Alarms |
| LED indicators |
Y |
| Indication |
| LED indicators |
Y |
| Ports & interfaces |
| Ethernet LAN (RJ-45) ports |
2 |
| Technical details |
| Compliance industry standards |
IEEE 802.3/802.3u/802.3ab/802.3at/802.3af |
| Input current |
0.65A |
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
| Power consumption (typical) |
30W |
| Power over Ethernet (PoE) support |
Y |
| Networking |
| Cabling technology |
Cat. 5/5e |
| Ethernet LAN data rates |
10,100,1000 Mbit/s |
| Compliance industry standards |
IEEE 802.3/802.3u/802.3ab/802.3at/802.3af |
| Power over Ethernet (PoE) |
Y |
| Weight & dimensions |
| Weight |
162 g |
| Power |
| AC adapter input voltage |
100 - 240 V |
| AC adapter frequency |
50/60 Hz |
| Input current |
0.65 A |
| Power consumption (typical) |
30 W |
| Certificates |
| Certification |
CE, FCC |
| Operational conditions |
| Operating temperature (T-T) |
-10 - 45 °C |
| Operating relative humidity (H-H) |
0 - 95% |
| Storage temperature (T-T) |
-20 - 60 °C |
| Features |
| LED indicators |
Y |
| Certification |
CE, FCC |
Features
Trendnet TPE-115GI. Ethernet LAN data rates: 10,100,1000 Mbit/s, Cabling technology: Cat. 5/5e, Compliance industry standards: IEEE 802.3/802.3u/802.3ab/802.3at/802.3af. Certification: CE, FCC. AC adapter input voltage: 100 - 240 V, AC adapter frequency: 50/60 Hz, Input current: 0.65 A. Weight: 162 g
Product Description
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
